WestBend EM925AKS-P1 Instruction Manual - Page 13

12. DINNER PLATE a) Press " DINNER PLATE " repeatedly until the number you wish appears in the display, "9.0","12.0","18.0" oz will display in order. For example, press "DINNER PLATE" once, "9.0" appears. b) Press "START/+30 SEC." to cook, buzzer sounds once. When cooking finishes, buzzer sounds five times. 13. PIZZA(Reheat) a) Press " PIZZA " repeatedly until the weight of your pizza appears in the display, "4.0", "8.0", "14.0" oz will display in order. For example, press "PIZZA" once, "4.0" appears. b) Press "START/+30 SEC." to cook, buzzer sounds once. When cooking finishes, buzzer sounds five times. 14. MEMORY FUNCTION (1) Press "0/MEMORY" to choose memory setting 1-3. The LED will display 1,2,3. (2) If the setting has been programmed, press " START/ +30 SEC." to use it. If not, continue to choose the setting. Only one or two stages can be set. (3) After finishing the setting, press "START/ +30 SEC." once to save the setting. Press " START/ +30 SEC." again, it will start cooking. Example: to program the following setting as the second memory, to cook the food with 80% microwave power for 3 minutes and 20 seconds. The steps are as follows: a. In waiting state, press "0/MEMORY" twice, the screen displays "2". b.Press "TIME COOK" once, then press "3", "2", "0" in order. c. Press "POWER" once, "PL10" displays, then press "8" and "PL8" displays. d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once and the LED will display "2". If you press "START/+30SEC." again, the setting will be saved as memory 2 and it will start cooking. e. If power is lost, the "0/MEMORY" setting will need to be reprogrammed. f. If you want to run the saved setting, in waiting state, press "0/MEMORY" twice, screen displays "2", then press "START/+30SEC." to run. English-13