WestBend SCL5BR Instruction Manual - Page 4

ASSEMBLING YOUR SMOOTHIE MAKER Before assembling your smoothie maker, wash all parts, except for the motor base in warm, soapy water, rinse thoroughly and dry. Unscrew and disassemble the valve for cleaning (see Cleaning Your Smoothie Maker section). To prolong the life of your smoothie maker, do not wash parts in the dishwasher. 1. Position the rubber gasket down onto the circular flat surface in the blade base. 2. Screw the blade base on the bottom of the blending jar by twisting the blade base clockwise until tightened. Make sure that the blade base is tightly fastened to the blending jar and that the rubber gasket is properly compressed between the blending jar and the blade base. 3. Place the lid onto the top of the blending jar. Place the lid cap in the center of the lid or place the stir stick through the center of the lid if blending liquids or frozen drinks. 4. Place the blending jar onto the motor base so that the bottom of the blade base is sitting flat on the motor base. 5. Plug in the cord. 6. Your smoothie maker is now ready to use. Stir Stick Lid Cap Lid Blending Jar Blender Cap Dispensing Valve Rubber Gasket Blade Base Motor Base 4