Western Digital Black PCIe SSD Drive Specification Sheet - Page 2

WD Black™ PCIe SSD Specifications Model Numbers2 WD Black PCIe SSD M.2 2280 Interface1, 3 WD Black PCIe SSD M.2 2280 Performance4 [4KB QD32] PCMark Sequential Read MB/s (Q=32, T=1)5 Sequential Write MB/s (Q=32, T=1) Random Read 4 KB IOPS (Q=32, T=4) Random Write 4 KB IOPS (Q=32, T=4) Endurance (TBW)6 Power7 Avg. Active Power (mW)4 Supply Voltage Peak Power Low Power Mode PS3 (mW) Low Power Mode PS4 (mW) Reliability MTTF8 Environmental Operating Temperatures9 Non-operating Temperatures10 Operating Vibration Non-operating Vibration Operating/Non-Operating Shock Certifications Limited Warranty11 Physical Dimensions Size: M.2 2280 Weight: M.2 2280 256GB 512GB WDS256G1X0C WDS512G1X0C PCIe Gen3 8 Gb/s, up to 4 lanes PCIe Gen3 8 Gb/s, up to 4 lanes 180 K 2,050 700 170 K 130 K 80 180 K 2,050 800 170 K 134 K 160 135 3.3 V ± 5% 2.5 A (10 us) 50 5.5 135 3.3 V ± 5% 2.5 A (10 us) 50 5.5 1.75M hours 1.75M hours 32 °F to 158 °F (0 °C to 70 °C) -67 °F to 185 °F (-55 °C to 85 °C) 5.0 gRMS, 10-2000 Hz, 3 axes 4.9 gRMS, 7-800 Hz, 3 axes 1,500 G @ 0.5 ms half sine FCC, UL, TUV, KC, BSMI, VCCI 5 years 32 °F to 158 °F (0 °C to 70 °C) -67 °F to 185 °F (-55 °C to 85 °C) 5.0 gRMS, 10-2000 Hz, 3 axes 4.9 gRMS, 7-800 Hz, 3 axes 1,500 G @ 0.5 ms half sine FCC, UL, TUV, KC, BSMI, VCCI 5 years 22 ± 0.15 mm x 80 ± 0.15 mm x 2.23 mm 22 ± 0.15 mm x 80 ± 0.15 mm x 2.38 mm 7.2 ± 0.5 g 7.2 ± 0.5 g Specifications subject to change without notice. 1 Backward compatible to Gen2 and Gen1. 2 Not all products may be available in all regions of the world. 3 As used for storage capacity, one megabyte (MB) = one million bytes, one gigabyte (GB) = one billion bytes, and one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environ- ment. As used for buffer or cache, one megabyte (MB) = 1,048,576 bytes. As used for transfer rate or interface, megabyte per second (MB/s) = one million bytes per second, and gigabit per second (Gb/s) = one billion bits per second. Effective maximum SATA 6 Gb/s transfer rate calculated according to the Serial ATA specification published by the SATA-IO organization as of the date of this specification sheet. Visit www.sata-io.org for details. 4 Performance is based on the CrystalDiskMark benchmark using a 1000MB LBA range on ASUS Z170 desktop with Intel® i7-6700K 4.0GHz, 8GB 2133MHz DDR4. Windows 10 Pro 64-bit using Microsoft StorNVMe driver, secondary drive. 5 Q=Queue, T=Thread. 6 TBW (terabytes written) values calculated using JEDEC client workload (JESD219) and vary by product capacity. 7 Measured using the MobileMark™ 2014 benchmark with ASPM (Active State Power Management) enabled. 8 MTTF = Mean Time To Failure based on internal testing using Telcordia stress part testing. 9 Operational temperature is measured by an on board temperature sensor. 10 Non-operational storage temperature does not guarantee data retention. 11 See http://support.wdc.com for regional specific warranty details. Western Digital 3355 Michelson Drive, Suite 100 Irvine, California 92612 U.S.A. For service and literature: http://support.wdc.com www.wdc.com 800.ASK.4WDC (800.275.4932) 800.832.4778 +86.21.2603.7560 00800.27549338 North America Spanish Asia Pacific Europe (toll free where available) +31.880062100 Europe/Middle East/Africa ® CAN ICES-3 (B) / NMB-3 (B) Western Digital, WD, the WD Logo, FIT Lab and WD Black are registered trademarks or trademarks of Western Digital Corporation or its affiliates in the U.S. and/or other countries. All other marks that may be mentioned herein are the property of their respective owners. Pictures shown may vary from actual products. Product specifications subject to change without notice. © 2017 Western Digital Corporation or its affiliates. All rights reserved. 2879-800086-A00 Jan 2017