Western Digital My Net N900 Central User Manual - Page 74
Restoring the Router to Factory Defaults, Rebooting the Router, Reset to Factory Default Settings
View all Western Digital My Net N900 Central manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
PERFORMING ADVANCED TASKS Restoring the Router to Factory Defaults You may want to reset the router to how it was when you bought it. You have two options for restoring factory defaults: through the user interface or through the Reset button on the bottom of the router. To reset the router on the user interface: 1. On the Advanced Settings screen, click the Administrator icon. 2. Click the System tab. 3. Click Reset to the right of Reset to Factory Default Settings. 4. When a confirmation message displays, click OK. 5. Wait until the router reboots before using it. To reset the router manually: 1. Press and hold the Reset button on the bottom of the router for at least 10 seconds. When the reset finishes, the Power LED blinks. Important: Do not reboot the router or close the application while the update is taking place. Rebooting the Router WARNING! To avoid data loss, before rebooting, stop all network and read/write activities. You can reboot the router two ways. If you are physically close to it, just press the On/Off button on the router. If you cannot easily press the button: 1. On the Advanced Settings screen, click the Administrator icon. 2. Click the System tab. 70 MY NET N900 CENTRAL USER MANUAL