Western Digital My Passport Air User Manual - Page 7
Disk Drive Format, Physical Description, Power/Activity LED, USB 3.0 Interface, Registering the Drive - not showing up
View all Western Digital My Passport Air manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
MY PASSPORT AIR USER MANUAL Disk Drive Format Your My Passport Air drive is formatted as a single HFS+J partition for compatibility with Mac OS X operating systems. If you want to use the drive with a Windows computer, see "Reformatting the Drive" on page 28 and "Troubleshooting" on page 29. Physical Description As shown in Figure 2, the My Passport Air drive has: • Power/Activity LED • A USB 3.0 interface port USB 3.0 Interface Port Power/Activity LED Figure 2. My Passport Air Drive Power/Activity LED The power/activity LED shows the drive's power state as follows: LED Appearance On steady Fast flashing, approximately 3 times per second Slow flashing, approximately every 2.5 seconds Power State/Activity Idle Activity System standby USB 3.0 Interface USB 3.0 supports data transfer rates up to 5 Gb/s. USB 3.0 is backward compatible with USB 2.0. Connection to a USB 2.0 port transfers data at the port speed-up to 480 Mb/s. Registering the Drive Always register your My Passport Air drive to get the latest updates and special offers. You can easily register your My Passport Air drive using the WD Drive Utilities software, as described in "Registering the Drive" on page 26. Another way is to register online at http://register.wdc.com. ABOUT YOUR WD DRIVE - 3