Western Digital WD15000AH1U User Manual - Page 178
Connect the interface cable., Once complete, the LEDs glow steadily to indicate power-on state.
View all Western Digital WD15000AH1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
MY BOOK WORLD EDITION USER MANUAL 7. Close the cover and firmly push down until it locks into place. 8. Reconnect only the power cable to the device. Do not connect computer interface cables. 9. The drive starts the rebuild process automatically and the LEDs cycle from bottom to top. The RAID rebuild may take up to 12 hours depending on drive capacity and activity, but typically completes in 5-7 hours. Allow the RAID rebuild to complete. Important: Do not attempt to use the device during the rebuild process. 10. Once complete, the LEDs glow steadily to indicate power-on state. 11. Connect the interface cable. 12. Return the faulty drive following the instructions provided in the WD knowledge base article# 1709. Important: Do not disassemble the internal drive and attached assembly components. Return the entire internal drive assembly intact to WD. REPLACING A DRIVE (MY BOOK WORLD EDITION II) - 172