Western Digital WD7500H1Q-00 User Manual - Page 28
Create New RAID set. Loss
View all Western Digital WD7500H1Q-00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
MY BOOK STUDIO EDITION II USER MANUAL Disk Status Messages WD RAID Manager reports the following messages depending on the current status of your Disk A and B. Displayed Status Text Good No hard disk No Config Faulty Rebuilding Good Rejected Description User Action The slot configuration contains valid data. Consult the array status to see if other errors have been detected. None The slot contains no HDD Install drive in empty slot. The slot does not contain Create New RAID set. (Loss of a valid configuration. data) Mismatched capacity. Replace drive with identical capacity drive and re-create RAID set. The slot is marked as faulty. Replace drive. The slot is currently being Wait for rebuild to complete. rebuilt from the other slot. This will take several hours. Initialization failed to complete. Replace other drive. The slot contains an HDD that does not meet the unit's requirements. Install drive that is compatible with RAID device. Only WD Green Drives are compatible. WD RAID MANAGER FOR WINDOWS - 25