Western Digital WDH2Q60000 User Manual - Page 22
Check disk status. See Disk
View all Western Digital WDH2Q60000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
MY BOOK MIRROR EDITION USER MANUAL RAID Status Messages WD RAID Manager reports the following messages depending on the current status of your drive. Displayed Status Text Healthy Setting Mismatched Description User Action Array is properly configured and operating normally. Drives from different RAID sets detected in slots. None Both slots have valid array configurations, but they do not agree on the settings and the device is not able to determine which configuration is newer. Install another drive that is not part of a different RAID array. Degraded RAID Status Rebuilding Bad Install the original drive that is part of the RAID array.Create a new array with the installed drives. The array configuration is valid and is currently RAID1, but one slot is marked as faulty. RAID 1 only Consult the slot status values to determine which slot is faulty and replace the drive. The array configuration is valid, but one slot is being rebuilt from the other slot. RAID 1 only Recovering from degraded mode. Wait for rebuild to complete. (This may take several hours.) Neither slot contains a Check disk status. See "Disk valid array configuration. Status Messages" on page 20. WD RAID MANAGER FOR MAC - 19