Westinghouse MT25 ARM9 Installation Instructions - Page 4
G or H, G or F
View all Westinghouse MT25 ARM9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
This product is designed to accommodate screens with Vesa® compliant hole pattern. For safe mounting, please make sure that mounting screws turns at least three complete turns in the screen inserts. FOR VESA 75 MOUNTING PATTERN: 1. Choose hole pattern indicated below. 2. Attach tilt/adapter plate to back of monitor using four 10 mm screws (G) as indicated below. 3. If hole pattern is in a pocket, attach tilt/adapter plate to back of monitor using four 20 mm screws (H) and four retaining spacers (C) as indicated below. For screens with a hole pattern in a pocket, spacers (C) go between tilt/adapter plate and monitor. Note: Screen may appear slightly different than illustrated G or H TILT/ADAPTER PLATE FOR VESA 100 MOUNTING PATTERN: 1. Choose hole pattern indicated below. 2. Attach tilt/adapter plate to back of monitor using four 10 mm screws (G) as indicated below. Note: If you don't get three complete turns in the screen inserts, use four M4 x 12 mm screws (F) instead of four M4 x 10 mm screws (G). TILT/ADAPTER PLATE G or F Note: Screen may appear slightly different than illustrated 4 of 6 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 04-16-04 SHEET #: 095-9194-1 For customer service call 1-866-287-5555.