Westinghouse MT80A TILT Installation Instructions - Page 6
Attaching Adapter Plate to Flat Panel Screen - mount
View all Westinghouse MT80A TILT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Attaching Adapter Plate to Flat Panel Screen WARNING • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. 2 FOR VESA® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate (A) to back of screen using four M4 x 10 mm screws (D) as shown below. *Note: If hole pattern is in a pocket, attach adapter plate (A) to back of screen using four M4 x 20 mm screws (E) and four retaining spacers (F) as indicated below. FOR VESA 100 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate (A) to back of screen using four M4 x 10 mm screws (D) as shown below. A D *For screens with a hole pattern in a pocket, spacers (F) go between adapter plate (A) and screen. F A D 6 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1