Whirlpool AD35USS Use and Care Guide - Page 6

Desired Humidity 1. Press DESIRED HUMIDITY to select the desired humidity setting. 2. Choose Normal, Dry, Max Dry or Continuous Run. s Normal-Will operate the dehumidifier at the selected fan speed until the humidity levels are lowered. s Dry-Will operate the dehumidifier at the selected fan speed until the humidity levels are lowered more than the Normal setting. s Max Dry-Will operate the dehumidifier at the selected fan speed until the humidity levels are lowered to the maximum level. s Continuous Run-Will operate the dehumidifier continuously at the selected fan speed regardless of humidity level. The dehumidifier will turn off only if the bucket is full or removed. NOTE: The electronic control will cycle the compressor on and off if a low temperature condition exists. Pressing the Desired Humidity arrow will not increase or decrease the amount of moisture removed during a low temperature condition. Normal compressor operation will resume when the low temperature condition no longer exists. Draining the Dehumidifier WARNING 2. Use front and back handles to lift bucket. Sickness Hazard Do not drink water collected in water bucket. Doing so can result in sickness. Option 1-Remove Bucket If a floor drain is not available, or you do not plan to run your dehumidifier continuously, you may want to simply empty the bucket. 1. Use front handle to slide bucket out. 3. Pour water through opening into a sink or tub. 4. Reinstall bucket. IMPORTANT: If the Empty/Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket. 6