Whirlpool G7CE3034X W10346696C.fm - Page 9
Dual/Triple-Circuit Element, Bridge Element, on some models
View all Whirlpool G7CE3034X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Hot Surface Indicator Lights (on Standard Control models) The Hot Surface Indicator Lights will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off. Hot Surface If the cooktop is on when a power failure occurs, the Hot Surface Indicator Lights will remain on after the power is restored to the cooktop. They will remain on until the cooktop has cooled completely. Power Light Each cooktop has a Power On light. The light will glow when any burner is on. To Use SINGLE: 1. Push in and turn knob from the OFF position to the SINGLE zone anywhere between Low and High. 2. Turn knob to OFF when finished. To Use DUAL and TRIPLE: 1. Push in and turn knob from the OFF position to the DUAL or TRIPLE zone anywhere between Low and High. 2. Turn knob to OFF when finished. Bridge Element (on some models) The bridge element allows flexibility in the left side cooking area. Dual/Triple-Circuit Element (on some models) The dual-size and triple-size elements offer flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual and triple sizes combine single, dual and outer element and are recommended for larger cookware, large quantities of food, and home canning. Triple Element (on some models) Use the bridge area to create an oblong heated area to cook with large cookware. A B A B C Dual Element A. Single size B. Dual size C. Triple size A B A. Single size B. Dual size B C A C A. Single size B. Bridge area C. Single size Use the bridge element to create an oblong heated area to cook with oblong pans. To use SINGLE (C): 1. Push in and turn front left knob from OFF position to the SINGLE zone anywhere between Low and High. 2. Turn knob to OFF when finished. To use SINGLE and BRIDGE area (C + B): 1. Push in and turn front left knob from OFF position to the BRIDGE zone anywhere between Low and High. 2. Turn knob to OFF when finished. To use SINGLE (A): 1. Push in and turn rear left knob from OFF position anywhere between Low and High. 2. Turn knob to OFF when finished. To use both Single elements and Bridge (A + B + C): 1. Turn on Single and Bridge (C + B). 2. Turn on Single (A). 3. Turn knobs to OFF when finished. A. Triple zone B. Dual zone C. Single zone 9