Whirlpool GGE390LXS Installation Instructions - Page 9
Style 2: Direct wire strain relief, Electrical Connection Options, If your home has, And you will - electric range
UPC - 883049199429
View all Whirlpool GGE390LXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Style 2: Direct wire strain relief ■ Use Phillips screwdriver to remove screws and slide cord/conduit plate down and out. ■ Feed the flexible conduit through the strain relief, allowing enough slack to easily attach wiring to the terminal block. ■ Tighten strain relief screw against the flexible conduit. ■ Position cord/conduit plate as shown in the following illustration. ■ Replace cord/conduit plate and insert screws. ■ Assemble a UL listed conduit connector in the opening. 5. Replace back panel and screws on rear of range. 6. Complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if 4-wire is not available) Electrical Connection Options If your home has: And you will be Go to Section: connecting to: 4-wire receptacle (NEMA type 14-50R) A UL listed, 250-volt minimum, 40-amp, range power supply cord 4-wire connection: Power supply cord 4-wire direct 5" (12.7 cm) A fused disconnect or circuit breaker box 4-wire connection: Direct wire 3-wire receptacle (NEMA type 10-50R) A UL listed, 250-volt minimum, 40-amp, range power supply cord 3-wire connection: Power supply cord 3-wire direct 1" (2.5 cm) 3" (7.6 cm) A fused disconnect or circuit breaker box 3-wire connection: Direct wire A B A. Removable retaining nut B. Strain relief 9