Whirlpool GGG390LXB Owners Manual - Page 8

ELECTRONIC OVEN CONTROLS This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and appearances of the items shown here may not match those of your model. A B CD E FG P ONM LK J IH A. Upper oven settings B. Oven display C. Upper oven start D. Upper oven cancel E. Precise Clean™ Feature F. Oven light G. Control lock H. Lower oven cancel I. Lower oven start J. Temperature/Time adjust K. Settings L. Clock M. Timer set/off N. Start time O. Cook time P. Lower oven settings Display When power is first supplied to the range, or if a power failure has occurred, 12:00 will appear on the display. See "Clock" in the "Settings" section to set time of day. When the oven is not in use, the display shows the time of day. 4. Press TIMER SET/OFF to clear the display. NOTE: A reminder beep will sound until the Kitchen Timer is canceled. To Cancel: Press the TIMER SET/OFF pad. Cancel The Cancel pad stops any function except the Clock, Timer and Control Lock. Oven Light While the oven doors are closed, press OVEN LIGHT to turn the lights on and off. Both oven lights will come on when either door is open. The oven lights will not come on during the Self-Clean cycle. Kitchen Timer The Kitchen Timer can be set in hours or minutes up to 9 hours and 59 minutes, and counts down the set time. The Kitchen Timer does not start or stop the oven. To Set: 1. Press TIMER SET/OFF pad. "Set TIMER" will scroll down the upper text display area, and the clock will display "--:--" with the colon flashing. 2. Press the Temp/Time "up" or "down" arrow pads until the desired time is reached. "Press TIMER" will scroll down the upper text display area. 3. Press TIMER SET/OFF to start the timer. The colon stops flashing, and the time begins counting down. "TIMER STARTED" will scroll down the upper text display area. The last minute of the timer countdown will be displayed in seconds. At the end of the set time, one long beep will sound, and "TIMER End" will be displayed. Settings Energy Save The Energy Save mode deactivates the display to reduce energy consumption. To Activate the Energy Save Mode: 1. Press and hold SETTINGS for 3 seconds. "Energy save on." will appear in the upper text area. 2. The setting will be activated after 5 minutes. Any mode may be used with the range in Energy Save by simply selecting the desired mode. To Deactivate the Energy Save Mode: 1. Press and hold SETTINGS for 3 seconds. "Energy save off." will appear in the upper text area. 2. The clock will reappear in the display, and the range can be operated as usual. Fahrenheit and Celsius The temperature is factory preset to Fahrenheit, but can be changed to Celsius. 1. Press SETTINGS once. "TEMP UNIT" appears in the upper text area while "FAHRENHEIT. Press (^) for Celsius" will scroll twice from right to left in the lower text area. 2. Press the Temp/Time "up" arrow pad to change the temperature unit setting. "CELSIUS. Press (^) for Fahrenheit" will scroll twice from right to left in the lower text area. 3. "CELSIUS Selected" will scroll right to left in the lower text area. The temperature units have been changed. 8