Whirlpool GS5VHAXWA User Guide - Page 14

Grille, Water, Filtration, System, Model TIWG2LfT2RFWG2, Capacity, Gallons 758 Liters, Model TlWG2/

Page 14 highlights

Base Grille Water Filtration System Model TIWG2LfT2RFWG2 Capacity 200 Gallons (758 Liters) Model TlWG2/T2RFWG2 Capacity 200 Gallons (758 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSl Standards 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSl Standards 42 and 53. Substance Reduction Aesthetic Effects Chlorine Taste/Odor Particulate Class II* Contaminant Reduction Lead: @ pH 6.5*** Lead: @ pH 8.5*** Mercury: @ pH 6.5 Mercury: @ pH 8.5 Benzene O-Dichlorobenzene Toxaphene Carbofuran NSF Reduction Requirements 50% reduction 85% reduction NSF Reduction Requirements 0.010 mg/L 0.010 mg/L 0.002 mg/L 0.002 mg/L 0.005 mg/L 0.6 mg/L 0.003 mg/L 0.04 mg/L Average Influent Influent Challenge Concentration Maximum Effluent 2.0182 mg/L 1333333 #/mL Average Influent 0.1533 mg/L 0.1400 mg/L 2.0 mg/L _+10% 0.06 mg/L ** At east 10,000 part c es/mL 6600 #/mL Influent Challenge Concentration Maximum Effluent 0.15 mg/L _+10% 0.15 mg/L _+10% 0.0005 mg/L 0.0007 mg/L 0.0058 mg/L 0.0059 mg/L 0.0154 mg/L 0.006 mg/L _+10% 0.006 mg/L _+10% 0.015 mg/L _+10% 0.0002 mg/L 0.0005 mg/L 0.0012 mg/L 1.7571 mg/L 0.015 mg/L 1.8 mg/L _+10% 0.015 mg/L _+10% 0.0250 mg/L 0.001 mg/L 0.0819 mg/L 0.08 mg/L _+10% 0.0400 mg/L Average Effluent 0.0536 mg/L 2325 #/mL Average Effluent 0.0005 mg/L 0.0006 mg/L 0.0002 mg/L 0.0003 mg/L 0.0006 mg/L 0.0066 mg/L 0.001 mg/L 0.0213 mg/L Minimum % Reduction 97.03 99.51 Minimum % Reduction 99.67 99.50 96.54 91.57 92.22 98.58 93.33 51.13 Average % Reduction 97.34 99.83 Average % Reduction 99.67 99.57 96.54 94.92 96.34 99.63 93.33 74.00 Test Parameters: pH = 7.5 _+0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 68°F to 71.6°F (20°C to 22°C). • It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised. • Use replacement cartridge T2RFWG2, part #4396841. In Canada, use replacement cartridge T2RFWG2, part #4396841 B. 2008 suggested retail price of $39.99 U.S.A./ $49.99 Canada. Prices are subject to change without notice. Model TlWG2L: Style 1 -When the filter indicator reads 10%, order a new filter. When the filter indicator reads 0%, it is recommended that you replace the filter. • The product is for cold water use only. • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. • Refer to the "Assistance or Service" section for the Manufacturer's name, address and telephone number. • Refer to the "Warranty" section for the Manufacturer's limited warranty. Style 2 - When the filter indicator light changes from green to yellow, order a new filter. When the filter indicator light changes from yellow to red, it is recommended that you replace the filter. Style 3 - When the water filter status display changes from "GOOD" to "ORDER," order a new filter. When the filter indicator reads "REPLACE," it is recommended that you replace the filter. Application Guidelines/Water Supply Parameters Water Supply Water Pressure Water Temperature Service Flow Rate City or Well 30 - 120 psi (207 - 827 kPa) 33 ° - 100°F (0.6 ° - 37.8°C) 0.5 gpm (1.9 Lpm) @ 60 psi Model TlWG2: Change the water filter cartridge every 6 months depending upon your usage. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the water filter cartridge more often. • These contaminants are not necessarily in your water supply. While testing was performed under standard laboratory conditions, actual performance may vary. *Class II particle size: 1 um to

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Base
Grille
Water
Filtration
System
Model TIWG2LfT2RFWG2
Capacity
200 Gallons (758 Liters)
Model TlWG2/T2RFWG2
Capacity
200 Gallons (758 Liters)
System
tested
and
certified
by NSF International
against
NSF/ANSI
Standard
42 for the reduction
of Chlorine
Taste and
Odor,
Particulate
Class
II*; and against
NSF/ANSI
Standard
53 for the reduction
of Mercury,
Benzene,
Toxaphene,
O-dichlorobenzene,
and
Carbofuran.
This
system
has been
tested
according
to NSF/ANSl
Standards
42 and
53 for the
reduction
of the substances
listed
below.
The
concentration
of the
indicated
substances
in water
entering
the system
was
reduced
to a concentration
less than
or equal
to the
permissible
limit for water
leaving
the system,
as specified
in NSF/ANSl
Standards
42 and
53.
Substance
Reduction
NSF Reduction
Average
Influent
Challenge
Maximum
Average
Minimum
%
Average
%
Aesthetic
Effects
Requirements
Influent
Concentration
Effluent
Effluent
Reduction
Reduction
Chlorine Taste/Odor
50% reduction
2.0182
mg/L
2.0 mg/L
_+10%
0.06 mg/L **
0.0536
mg/L
97.03
97.34
Particulate
Class II*
85% reduction
1333333
#/mL
At
east 10,000
part c es/mL
6600
#/mL
2325 #/mL
99.51
99.83
Contaminant
NSF Reduction
Average
Influent
Challenge
Maximum
Average
Minimum
%
Average
%
Reduction
Requirements
Influent
Concentration
Effluent
Effluent
Reduction
Reduction
Lead: @ pH 6.5***
0.010 mg/L
0.1533 mg/L
0.15 mg/L _+10%
0.0005 mg/L
0.0005
mg/L
99.67
99.67
Lead: @ pH 8.5***
0.010 mg/L
0.1400 mg/L
0.15 mg/L _+10%
0.0007 mg/L
0.0006
mg/L
99.50
99.57
Mercury:
@ pH 6.5
0.002 mg/L
0.0058 mg/L
0.006 mg/L
_+10%
0.0002 mg/L
0.0002
mg/L
96.54
96.54
Mercury:
@ pH 8.5
0.002 mg/L
0.0059 mg/L
0.006 mg/L
_+10%
0.0005 mg/L
0.0003
mg/L
91.57
94.92
Benzene
0.005 mg/L
0.0154 mg/L
0.015 mg/L
_+10%
0.0012 mg/L
0.0006
mg/L
92.22
96.34
O-Dichlorobenzene
0.6 mg/L
1.7571 mg/L
1.8 mg/L
_+10%
0.0250 mg/L
0.0066
mg/L
98.58
99.63
Toxaphene
0.003 mg/L
0.015 mg/L
0.015 mg/L
_+10%
0.001 mg/L
0.001
mg/L
93.33
93.33
Carbofuran
0.04 mg/L
0.0819 mg/L
0.08 mg/L _+10%
0.0400 mg/L
0.0213
mg/L
51.13
74.00
Test Parameters:
pH = 7.5 _+0.5 unless otherwise
noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa).
Temp. = 68°F to 71.6°F (20°C to 22°C).
It is essential that operational,
maintenance,
and filter
replacement
requirements
be carried out for the product
to
perform
as advertised.
Use replacement
cartridge
T2RFWG2,
part #4396841.
In Canada, use replacement
cartridge
T2RFWG2, part
#4396841 B. 2008 suggested
retail price of $39.99 U.S.A./
$49.99 Canada. Prices are subject
to change without
notice.
Model TlWG2L:
Style 1 -When
the filter indicator reads 10%,
order a new filter. When the filter indicator reads 0%, it is
recommended
that you replace the filter.
Style 2 - When the filter indicator light changes from green to
yellow, order a new filter. When the filter indicator light changes
from yellow to red, it is recommended
that you replace the filter.
Style 3 - When the water filter status display changes from
"GOOD"
to "ORDER,"
order a new filter. When the filter
indicator
reads "REPLACE,"
it is recommended
that you
replace the filter.
Model
TlWG2:
Change the water filter cartridge
every
6 months depending
upon your usage. If the water flow to the
water dispenser
or ice maker
decreases
noticeably
before
6 months have passed,
replace the water filter cartridge
more
often.
These contaminants
are not necessarily
in your water supply.
While testing
was performed
under standard
laboratory
conditions,
actual performance
may vary.
The product
is for cold water use only.
Do not use with water that is microbiologically
unsafe or of
unknown
quality without
adequate
disinfection
before or after
the system.
Refer to the "Assistance
or Service"
section for the
Manufacturer's
name, address and telephone
number.
Refer to the "Warranty"
section for the Manufacturer's
limited
warranty.
Application
Guidelines/Water
Supply Parameters
Water Supply
City or Well
Water Pressure
30 - 120 psi (207 - 827 kPa)
Water Temperature
33 ° - 100°F (0.6 ° - 37.8°C)
Service Flow Rate
0.5 gpm (1.9 Lpm) @ 60 psi
*Class
II particle
size: 1 um to <5 um
**Test requirement
is at least 100,000
particles/mL
of AC Fine Test Dust.
***Compliant
for Lead reduction
requirements
under
NSF/ANSl
Standard
53 as tested
by Pace Analytical
Services,
Inc.
(R_NSF is aregistered
trademark
of NSF International.
14