Whirlpool GSC309PVS Microwave Use and Care - Page 6

Displays, Number Codes, Start, Add a Minute, Upper Oven Cancel, Clock, Tones - weight

Page 6 highlights

Display(s) When power is first supplied to the appliance, everything on the display(s) will light up for 5 seconds. Then, "PF id = 27" or "PF id = 30" will appear. Touch LOWER OVEN OFF/CANCEL or UPPER OVEN OFF/CANCEL to clear display(s). Any other time "PF id = 27" or "PF id = 30" appears, a power failure occurred. Touch LOWER OVEN OFF/CANCEL or UPPER OVEN OFF/CANCEL and reset the clock if needed. Lower Oven Display When the lower oven is in use, this display shows the lower oven temperature, heat source(s) and start time. During lower oven Timed Cooking, this display also shows a vertical bar and minute time countdown and the stop time (if entered). If "Err" appears on the display, an invalid pad was touched. Touch LOWER OVEN OFF/CANCEL and retry the entry. When the lower oven is not in use, this display is blank. Upper Oven Display When the upper oven is in use, this display shows the upper oven heat source(s), cooking power, quantities, weights and/or help prompts. If "RETRY" flashes on the display for 1 second, an invalid pad was touched. Retry the entry. When the upper oven is not in use, this display shows the time of day or Timer countdown. Number Codes The oven is preset with shortcut number codes for High Speed and Microwave Cooking. A number code includes one or more of the following; cooking power, cook time and food quantity or weight. See the code charts in the "High Speed Cooking," "Custom Reheating," "Custom Defrosting" and "Popcorn" sections for additional information. Start, Add a Minute The START pad controls 2 separate functions: Start and Add a Minute. Starting The START pad begins any upper or single oven function except the Timer. If not touched within 5 seconds after pressing a pad, "START?" will appear on the display as a reminder. If not touched within 5 minutes after pressing a pad, the display will return to the time of day mode and the programmed function will be canceled. If cooking is interrupted, touching START will resume the preset cycle. Adding Minutes During High Speed Cooking, Crisping and Broiling, touching ADD A MINUTE (START) while the oven is operating will add cook time in 1-minute increments. During Microwave Cooking, touching ADD A MINUTE while the oven is operating, or at the end of a cycle, will add cook time in 1-minute increments. During Convection Cooking, touching ADD A MINUTE will not add minutes. Upper Oven Cancel The UPPER OVEN OFF/CANCEL pad stops any upper oven function except for the Clock, Timer and Control Lock. The oven will also turn off when the door is opened. When the door is opened, the element(s) and fan will turn off, but the oven light will remain on. Close the door and touch START to resume the cycle. Clock This is a 12-hour clock and does not show a.m. or p.m. To Set: Before setting, make sure the ovens, Timer and Timed Cooking are off. 1. Touch CLOCK. 2. Touch the number pads to set the time of day. 3. Touch CLOCK. To remove the time of day from the display: Touch and hold CLOCK 5 seconds. To return the time of day to the display: Touch CLOCK. The time should not have to be reset. Tones Tones are audible signals, indicating the following: One tone ■ Valid pad touch ■ Oven is preheated ■ Function has been entered Three tones ■ Invalid pad touch Four tones ■ End of cycle ■ Reminder, repeating each minute after the end-of-cycle tones All Tones (combination oven models only) All of the above tones are preset on, but can be turned off. To Turn Off/On: Touch and hold TIMER OFF for 5 seconds. A tone will sound, and "Snd oFF" will appear on the lower oven display for 3 seconds. Repeat to change back to "Snd on." Tone Volume The volume is preset at high, but can be changed to low. To Change: Touch and hold the number pad "7" for 5 seconds. A tone will sound, and "Snd Lo" will appear on the lower oven display for 3 seconds. Repeat to change back to "Snd HI." Reminder tones The Timer and Timed Cooking reminder tones are preset on, but can be turned off. Reminder tones do not include end-ofcycle tones. On combination oven models, if "All Tones" have been turned off, the reminder tones cannot be independently turned on. Timer To Turn Tones Off/On: Touch and hold TIMER SET until a tone sounds. Repeat to turn back on. Timed Cooking To Turn Tones Off/On: Touch and hold COOK TIME until a tone sounds and the lower oven display returns to inactive mode (blank). Repeat to turn back on. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

6
Display(s)
When power is first supplied to the appliance, everything on the
display(s) will light up for 5 seconds. Then, “PF id = 27” or
“PF id = 30” will appear. Touch LOWER OVEN OFF/CANCEL or
UPPER OVEN OFF/CANCEL to clear display(s).
Any other time “PF id = 27” or “PF id = 30” appears, a power
failure occurred. Touch LOWER OVEN OFF/CANCEL or UPPER
OVEN OFF/CANCEL and reset the clock if needed.
Lower Oven Display
When the lower oven is in use, this display shows the lower oven
temperature, heat source(s) and start time.
During lower oven Timed Cooking, this display also shows a
vertical bar and minute time countdown and the stop time (if
entered).
If “Err” appears on the display, an invalid pad was touched.
Touch LOWER OVEN OFF/CANCEL and retry the entry.
When the lower oven is not in use, this display is blank.
Upper Oven Display
When the upper oven is in use, this display shows the upper oven
heat source(s), cooking power, quantities, weights and/or help
prompts.
If “RETRY” flashes on the display for 1 second, an invalid pad
was touched. Retry the entry.
When the upper oven is not in use, this display shows the time of
day or Timer countdown.
Number Codes
The oven is preset with shortcut number codes for High Speed
and Microwave Cooking. A number code includes one or more of
the following; cooking power, cook time and food quantity or
weight. See the code charts in the “High Speed Cooking,”
“Custom Reheating,” “Custom Defrosting” and “Popcorn”
sections for additional information.
Start, Add a Minute
The START pad controls 2 separate functions: Start and Add a
Minute.
Starting
The START pad begins any upper or single oven function except
the Timer. If not touched within 5 seconds after pressing a pad,
“START?” will appear on the display as a reminder. If not touched
within 5 minutes after pressing a pad, the display will return to the
time of day mode and the programmed function will be canceled.
If cooking is interrupted, touching START will resume the preset
cycle.
Adding Minutes
During High Speed Cooking, Crisping and Broiling, touching ADD
A MINUTE (START) while the oven is operating will add cook time
in 1-minute increments.
During Microwave Cooking, touching ADD A MINUTE while the
oven is operating, or at the end of a cycle, will add cook time in
1-minute increments.
During Convection Cooking, touching ADD A MINUTE will not
add minutes.
Upper Oven Cancel
The UPPER OVEN OFF/CANCEL pad stops any upper oven
function except for the Clock, Timer and Control Lock.
The oven will also turn off when the door is opened. When the
door is opened, the element(s) and fan will turn off, but the oven
light will remain on. Close the door and touch START to resume
the cycle.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the ovens, Timer and Timed Cooking
are off.
1.
Touch CLOCK.
2.
Touch the number pads to set the time of day.
3.
Touch CLOCK.
To remove the time of day from the display:
Touch and hold
CLOCK 5 seconds.
To return the time of day to the display:
Touch CLOCK. The
time should not have to be reset.
Tones
Tones are audible signals, indicating the following:
One tone
Valid pad touch
Oven is preheated
Function has been entered
Three tones
Invalid pad touch
Four tones
End of cycle
Reminder, repeating each minute after the end-of-cycle tones
All Tones (combination oven models only)
All of the above tones are preset on, but can be turned off.
To Turn Off/On:
Touch and hold TIMER OFF for 5 seconds.
A tone will sound, and “Snd oFF” will appear on the lower oven
display for 3 seconds. Repeat to change back to “Snd on.”
Tone Volume
The volume is preset at high, but can be changed to low.
To Change:
Touch and hold the number pad “7” for 5 seconds.
A tone will sound, and “Snd Lo” will appear on the lower oven
display for 3 seconds. Repeat to change back to “Snd HI.”
Reminder tones
The Timer and Timed Cooking reminder tones are preset on,
but can be turned off. Reminder tones do not include end-of-
cycle tones. On combination oven models, if “All Tones” have
been turned off, the reminder tones cannot be independently
turned on.
Timer
To Turn Tones Off/On:
Touch and hold TIMER SET until a tone
sounds. Repeat to turn back on.
Timed Cooking
To Turn Tones Off/On:
Touch and hold COOK TIME until a tone
sounds and the lower oven display returns to inactive mode
(blank). Repeat to turn back on.