Whirlpool LEW0050PQ Use and Care Guide - Page 14
DRYER USE, Starting Your Dryer, Stopping and Restarting, Changing Cycles and Temperatures - washer
UPC - 050946000053
View all Whirlpool LEW0050PQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
DRYER USE WARNING Starting Your Dryer WARNING Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire. Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Do not dry items containing foam, rubber, or plastic in this dryer. Doing so can result in death or fire. WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing and shipping. IMPORTANT: For best performance, do not use fabric softener sheets in this dryer. You may use liquid fabric softener in the washer. 1. Clean the lint screen before each load. See "Cleaning the Lint Screen." 2. Load clothes loosely into the dryer and close the door. Do not pack the dryer. Allow space for clothes to tumble freely. 3. Press the POWER button to turn on the dryer. The indicator light will glow to indicate that the power is on. 4. Press the TEMPERATURE button to select the recommended temperature setting for the type of load being dried. See "Temperature" in the "Controls" section. 5. Turn the cycle knob to the recommended setting for the type of load being dried. See "Drying, Cycle and Temperature Tips." 6. After a short beep sounds, press the START button. Stopping and Restarting To stop your dryer at any time Turn the cycle knob to the STOP position or open the door. To restart the dryer 1. Close the door. 2. Select a new cycle and temperature (if desired). 3. After the beep sounds, press the START button. Changing Cycles and Temperatures To change the cycle or temperature after pressing START 1. Open the dryer door. 2. Press the TEMPERATURE button to change the temperature (if desired). 3. Turn the cycle knob to the new desired position. 4. After the beep sounds, press the START button. 14