Whirlpool MH1160XSQ Use and Care Guide - Page 5

PARTS AND FEATURES This manual may cover several different models. The model you have purchased may have some or all of the features shown here. The appearance of your particular model may differ slightly from the illustrations in this manual. A BC D MICROWAVE OVEN CONTROL E F G H IJ K A. Vent grille B. Model and serial number plate C. Charcoal filter (behind vent grille) D. Microwave oven light E. Door lock system F. Metal shielded window G. Cooking guide label H. Grease filters (shipped in microwave oven cavity) I. Cooktop light J. Microwave inlet cover K. Control panel Parts and Features not shown Turntable Turntable A B C A. Turntable B. Hub C. Support The turntable can rotate in either direction to help cook food more evenly. Do not operate the microwave oven without having the turntable in place. See "Assistance or Service" to reorder any of the parts. To Install: 1. Remove tape from the hub. 2. Place the support on the microwave oven cavity bottom. 3. Place the turntable on the support. Fit the raised, curved lines in the center of the turntable bottom between the three spokes of the hub. The rollers on the support should fit inside the turntable bottom ridge. Display When power is first supplied to the microwave oven, a ":" will blink in the display. Touch CANCEL OFF to stop the blinking. If the ":" blinks in the display at any other time, a power failure has occurred. Touch CANCEL OFF and reset the clock if needed. If an invalid value has been entered, the invalid entry tones will sound, and the input prompt will reappear in the display. Retry your entry. When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts. When the microwave oven is not in use (standby mode), the display shows the time of day or Timer countdown. The speed of the scrolling text may be adjusted, if necessary. To Adjust Scroll Speed: 1. Touch and hold CLOCK for 3 seconds until 2 tones sound. 2. Touch number pad "1" for SLOW, "2" for NORMAL or "3" for FAST. 3. Touch START to complete the adjustment. 5