Whirlpool MMV1153BAB Use and Care Guide - Page 10

Operating Instructions DEMONSTRATION MODE You can use the Demonstration mode to see how your microwave oven operates without the oven heating. 0 _o,s] Touch 0 pad and 1 pad at the same time. To turn demo mode off, repeat step 1 above. MORE/LESS The More(9)/Less(1) pads allow you to adjust pre-set cooking times. They only work in the Reheat, Auto Cooking, Add 30 sec, Time Cook modes. Use the More(9)/Less(1) pads only after you have already begun cooking with one of these procedures. 9Mo,_ 1. To ADD more time to an automatic cooking procedure: Touch the More(9) pad. Lo_s] 2. TO REDUCE the time of an automatic cooking procedure: Touch the Less(l) pad. COOKING AT HIGH POWER LEVELS Example: To cook food for 8 minutes 30 seconds at 100% power. 830 1. Enter the cook time. _ ENTER START 2. Touch ENTER/ START pad. When the cook time is over, you will hear four beeps and End will display. COOKING AT LOWER POWER LEVELS HIGH power cooking does not always give you the best results with foods that need slower cooking, such as roasts, baked goods, or custards. Your oven has 9 power settings in addition to HIGH. Example: To cook food for 7 minutes 30 seconds at 70% power. 730 1. Enter the cook time. PLoewveer l 2. Touch Power Level pad. 7 3. Enter the power level. _ENTER START 4. Touch ENTER/ START pad. When the cook time is over, you will hear four beeps and End will display. See cooking guide for Power levels, page 11. COOKING WITH MORE THAN ONE COOK CYCLE For best results, some recipes call for one Power Level for a certain length of time, and another Power Level for another length of time.Your oven can be set to change from one to another automatically, for up to three cycles at the first cycle is defrost. Example: To cook food for 3 minutes at 90% power and then 70% power for 7 minutes 30 seconds. 30 0 1. Enter the first cook time. Power Levem 2, Touch Power Level pad. 0Mo,o 730 PLoewveer l 7 3. Enter the power level. 4. Enter the second cook time. 5. Touch Power Level pad. 6. Enter the power level. _ENTER START 7. Touch ENTER/ START pad. When the cook time is over, you will hear four beeps and End will display. 10