Whirlpool RCC3024RQ Installation Instructions - Page 8
Attach Cooktop to Countertop, Complete Installation - parts
UPC - 050946997063
View all Whirlpool RCC3024RQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3-Wire Cable from Home Power Supply to 3-Wire Cable from Cooktop - U.S. only IMPORTANT: Use the 3-wire cable from power supply where local codes permit connecting the frame-ground conductor to the neutral (white) junction box wire. D A E F Attach Cooktop to Countertop NOTE: This section applies only if you are using clamp brackets. G A B F E G B H C A. Red wires B. Bare or green wire from cooktop C. 3-wire cable (from cooktop) D. Junction box E. White wire (from power supply) F. UL listed wire connector G. Black wire H. UL listed or CSA approved conduit connector 1. Connect the 2 black wires together using the UL listed wire connectors. 2. Connect the 2 red wires together using the UL listed wire connectors. 3. Connect the green or bare cooktop cable wires to the white (neutral) wire in the junction box using the UL listed wire connectors. 4. Install junction box cover. D C A. Glass cooktop B. Cooktop base C. Attachment screw D. Clamp bracket (extends far enough beyond cooktop base to alllow installation of clamping screws) E. 2½" (6.4 cm) clamping screw F. Countertop G. Foam seal 1. Place the 2½" (6.4 cm) clamping screws into the brackets. 2. Check that the cooktop is still level. 3. Use a flat-blade screwdriver to tighten the screws against the countertop. Do not overtighten. Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all your tools. 3. Dispose of/recycle all packaging materials. 4. Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by protective shipping material. Dry thoroughly with a soft cloth. For more information, see the "Cooktop Care" section of the Use and Care Guide. 5. Read "Cooktop Use" in the cooktop Use and Care Guide. 6. Reconnect power. NOTE: If the cooktop does not work after turning on the power, check that a circuit breaker has not tripped or a household fuse has not blown. See "Troubleshooting" section in the Use and Care Guide for further information. If you need Assistance or Service: Please reference the "Assistance or Service" section of the Use and Care Guide or contact the dealer from whom you purchased your cooktop. 8