Whirlpool RCS3004RS Installation Instructions - Page 3
Installation Instructions
UPC - 050946997100
View all Whirlpool RCS3004RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
INSTALLATION INSTRUCTIONS Tools and Parts Gather the required tools and parts before starting installation. Tools needed s Tape measure s Flat-blade screwdriver s Marker or pencil s Pliers Parts supplied s Clamp brackets (2) s 2¹⁄₂" (6.4 cm) clamping screws (2) Parts needed s A UL listed or CSA approved conduit connector s UL listed wire nuts Check local codes. Check existing electrical supply. See "Electrical Requirements." All electrical connections should be made by a licensed, qualified electrical installer. Location Requirements Make sure you have everything needed for correct installation. It is the responsibility of the installer to comply with the installation clearances specified in these instructions. IMPORTANT: Observe all governing codes and ordinances. When installing cooktop, use minimum dimensions given. s To eliminate the risk of burns or fire by reaching over the heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. s The cooktop must be a specified cooktop that is approved to be installed either alone or over an undercounter built-in oven. Check the cooktop burner box for an approved installation label. If you do not find this label, contact your dealer to confirm that your cooktop is approved. s Ovens approved for this type of installation will have an approval label located on the top of the oven. If you do not find this label, contact your dealer to confirm that your oven is approved. Refer to oven manufacturer's Installation Instructions for approval for built-in undercounter use and proper cutout dimensions. s When installing cooktop over an undercounter built-in oven, do not fasten cooktop to countertop with clamps. This will make the cooktop easier to remove if future servicing becomes necessary. s The cooktop should be installed away from strong draft areas, such as windows, doors, fans or strong heating vents. The cooktop should be located for convenient use in the kitchen. s Use the countertop opening dimensions that are given with these Installation Instructions. Given dimensions are minimum clearances and provide 0" (0 cm) clearance. s Grounded electrical supply is required. See "Electrical Requirements" section. Product Dimensions C B B C A A D A. 21" (53.3 cm) B. 30" (76.2 cm) 36" (91.4 cm) C 1.9 cm) D. 2⁷⁄₈" (7.3 cm) D A. 16¹⁄₂" (41.9 cm) B. 21" (53.3 cm) C. 18" (47.7 cm) overall D. 2⁷⁄₈" (7.3 cm) 3