Whirlpool RS675PXGT Use and Care Guide - Page 15

USING YOUR RANGE Command pads The command pads tell the oven what to do and in what order. Some command pads have an Indicator Light. The Indicator Light comes on when you press the command pad. The ON Indicator Light comes on when you press START/ENTER for an oven function. Using the control lock The control lock prevents unwanted use of the oven by disabling most of the control panel command pads (except CLOCK and TIMER SET/OFF). NOTES: • Control lock is only available when oven is not in use or control has not been set. • Set control lock when cleaning the control panel to prevent oven from accidentally turning on. To lock or deactivate the control panel: Press and hold START/ENTER for 5 seconds. A single tone will sound START and "Loc" and will appear on the ENTER temperature display. When the 5 SEC control is locked, "START?" will appear on the display if you press any command pad. To unlock the control panel: Press and hold START/ENTER for 5 seconds. A single tone will sound START and "Loc" and will disappear from ENTER the temperature display. 5 SEC Starting a function After programming a function, you must press START/ENTER to start the START function. If you do not press ENTER START/ENTER within 5 seconds 5 SEC of programming, "START?" will show on the display as a reminder. The control will return to time of day mode after 5 minutes if START/ENTER is not pressed. Canceling a function OFF/CANCEL will cancel any function except for the Clock and Timer Set OFF functions. When you press CANCEL OFF/CANCEL, the display will show the time of day or, if Minute Timer is also being used, the time remaining. To cancel the Minute Timer, see "Using the electronic Minute Timer" section. NOTE: You may hear a fan blowing in the oven even after you press OFF/CANCEL. This is the cooling fan. It will turn off when the oven cools down. 15