Whirlpool WCE97US6K Installation Instructions - Page 3

Product Dimensions A D B C F E A. Glass depth - black and white models - 213/4" (55.2 cm) Glass depth - Whirlpool and Maytag stainless steel models 227/8" (58.0 cm) Glass depth - KitchenAid stainless steel models - 215/8" (54.9 cm) B. Glass width - 24" (60.9 cm) models - 23¹³/16" (60.5 cm) Glass width - 30" black and white (76.2 cm) models 30¹³/16" (78.4 cm) Glass width - Whirlpool and Maytag 30" stainless steel (76.2 cm) models - 30¹3/16" (78.4 cm) Glass width - KitchenAid 30" stainless steel (76.2 cm) models 303/8" (77.1 cm) Glass width - 36" black and white (91.4 cm) models 365/16" (92.3 cm) Glass width - Whirlpool 36" stainless steel (91.4 cm) models 365/16" (92.3 cm) Glass width - Maytag 36" stainless steel (91.4 cm) models 361/16" (91.5 cm) Glass width - KitchenAid 36" stainless steel (91.4 cm) models 357/8" (91.0 cm) C. Frame depth - 205⁄16" (51.6 cm) D. Frame width - 24" (60.9 cm) models - 2159/64" (55.7 cm) Frame width - 30" (76.2 cm) models - 29" (73.7 cm) Frame width - 36" (91.4 cm) models - 347/16" (87.5 cm) E. Cooktop height with bottom heat shield - 37⁄8" (9.8 cm) Cooktop height lighted knobs - 415/16" (12.55 cm) F. Cooktop height including conduit (located at rear of cooktop, right side) - 5" (12.7 cm) Cooktop height lighted knobs, including conduit (located at rear of cooktop, right side) - 61/16" (15.4 cm) A A. Location of Power Cord (length of power cord is 48" (121.9 cm), including the conduit) Cabinet Dimensions IMPORTANT: If installing a range hood or microwave hood combination above cooking surface, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. A D C B L E F G H I K J A. 24" (60.9 cm) on 24" models; 30" (76.2 cm) on 30" models; 36" (91.4 cm) on 36" models B. Side and rear surfaces illustrated by dashed box above, must meet the minimum clearances to combustible material as defined in dimensions K and L below. C. 30" (76.2 cm) minimum clearance between top of cooktop platform and bottom of uncovered wood or metal cabinet (24" [61 cm] minimum clearance if bottom of wood or metal cabinet is covered by not less than 1/4" [0.6 cm] flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper) D. 13" (33 cm) recommended upper cabinet depth E. 2" (5.1 cm) F. 20¹⁄2" (52.0 cm) recommended cutout. Will fit in cutout from 20³⁄8"-209⁄16" (51.8-52.2 cm). G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop within minimum horizontal clearances to cooktop H. Junction box or outlet: 7" (17.8 cm) minimum from top of countertop I. Junction box or outlet: 9" (23.0 cm) maximum from right side of cabinet J. 29¹⁄2" (74.9 cm) recommended cutout on 30" (76.2 cm) models. Will fit in cutout from 29¹⁄16"-299⁄16" (73.8-75.1 cm) on 30" (76.2 cm) models. 35¹⁄2" (90.2 cm) recommended cutout on 36" (91.4 cm) models. Will fit in cutout from 349⁄16"-359⁄16" (87.8-90.3 cm) on 36" (91.4 cm) models. 225/16" (56.67 cm) recommended cutout on 24" (61.0 cm) Will fit in cutout from 221/4"- 223/7" (56.4 - 57.0 cm) on 24" (61.0 cm) models. K. 21/2" (6.35 cm) minimum distance to nearest left and right side combustible surface above cooktop L. 11/2" (3.81 cm) minimum distance from the back of the cooktop cutout to the nearest back side combustible surface above cooktop. NOTES: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modification, use a base cabinet with sidewalls wider than the cutout. If cabinet has a drawer, a 5¹⁄2" (14.0 cm) depth clearance from the top of the countertop to the top of the drawer (or other obstruction) in base cabinet is required. 3