Whirlpool WCE97US6K Owners Manual - Page 5
Cooktop Controls - Electronic Touch, Controls
View all Whirlpool WCE97US6K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
36" (91.4 cm) Model WCE97US6K Touch-Activated Electronic Control Model shown B C D A WARM ZONE TRIPLE ELEMENT H DUAL ELEMENT ON OFF ON OFF ZONE SIZE ON OFF ZONE SIZE Hold 3 sec Timer WARM ZONE OK ON OFF G A. Ceramic glass cooktop B. 6" (15.2 cm) single element C. 12"/10"/6" (30.5 cm/25.4 cm/15.2 cm) triple element D. Right rear warming zone F E E. 6" (15.2 cm) single element F. Control panel G. 10"/6" (25.4 cm/15.2 cm) dual element H. Model and serial number plate (located underneath cooktop on metal cabinet) COOKTOP CONTROLS - ELECTRONIC TOUCH CONTROLS WARNING Fire Hazard Turn off all controls when done cooking. Failure to do so can result in death or fire. Cooktop Controls 1. Touch ON/OFF for the desired element. 2. Touch the UP or DOWN keypad to select the power level. NOTE: Press the "+" (plus) or "-" (minus) keypads to increase or decrease power one level at a time. If a power level is not selected within approximately 10 seconds, the element will not turn on. 3. To change the power level while cooking, select a power level with the UP or DOWN keypad. 4. When finished cooking, touch ON/OFF for the desired element to turn off surface cooking area(s) individually or touch OFF to turn off all surface cooking areas at once. The electronic touch controls offer a variety of heat settings for optimal cooking results. For maximum element operation, all cooktop electronic touch controls can be set to High when bringing liquids to a rapid boil. When the cooktop is turned on or after power is restored to the cooktop after a power failure, all temperature setting lights will glow for 10-15 seconds. After the lights go off, the cooktop is ready to use. To Use: 5