Whirlpool WDF330PAHS Installation Guide - Page 25
Install Access Panel
View all Whirlpool WDF330PAHS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
INSTALL ACCESS PANEL - For Plastic, begin with Step 60 - For Metal, begin with Step 63 Plastic Panel: 60. Reinstall access panel and fasteners Insulation (on some models) Metal Panel: 63. Reinstall access panels Place the plastic access panel against the dishwasher leg. Make sure insulation does not interfere with the float assembly. 61. Check access panel edge Place the panel against dishwasher legs. Using a Phillips screwdriver or 1/4" nut driver, reinstall the screws through the holes in the access panel. 64. Check lower panel edge Check that the lower edge of the access panel touches the floor. Adjust if necessary. 62. Tighten fasteners Check that the lower edge of the access panel touches the floor. Adjust if necessary. 65. Tighten screws 1/4 turn Tighten access panel screws. Using a flat-blade screwdriver, turn the fasteners 1/4 turn clockwise to lock into place. The fastener slot will be straight up and down when properly locked. Go to Step 65. 25