Whirlpool WDT550SAPB Cycle Guide - Page 3
Control Guide
View all Whirlpool WDT550SAPB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Control Guide Control: Purpose: Comments: Start Resume To start or resume a wash cycle. If the door is opened during a cycle or the power is interrupted, the Start indicator flashes. The cycle will not resume until the door is closed and Start is selected. NOTE: If the Start button is located on top of door, push door firmly closed within 4 seconds of selecting Start. If the door is not closed within 4 seconds, the Start button LED will flash, an audible tone will be heard (on some models), and the cycle will not start. Cancel Drain Salt Indicator Descale To reset any cycle or options during selection. To cancel a wash cycle after it has started. Press Cancel/Drain and close the door firmly. The dishwasher starts a drain sequence. Let dishwasher drain completely. If the consumer desires to use the water softener feature in the dishwasher, the salt indicator light will glow when it is time to add salt. Refer to the owners manual for more details about how to use the water softener feature. If used, the salt indicator will glow when you need to add more salt. If limescale accumulation is detected, the descale icon will show. Salt may need to be added to the reservoir and the water hardness level set. Use a dishwasher cleaning agent such as affresh® with the Tough cycle to clean the dishwasher. Once completed, the icon will turn off. NOTE: In cases of extremely high amounts of limescale, descaling may have to be performed twice. 3