Whirlpool WDT720PADM Installation Guide - Page 14
Determine Cabinet Opening
View all Whirlpool WDT720PADM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Determine Cabinet Opening Your dishwasher has leveling legs. The following provides instructions to adjust the leveling legs to set the dishwasher to the correct height for your cabinet opening. Measure height of cabinet opening from underside of countertop to floor where dishwasher will be installed (you will need to measure the lowest point on the underside of the countertop and the highest point on the floor). Refer to "Dishwasher Height Adjustment Chart" to adjust the leveling legs. NOTE: If the minimum cabinet opening height is less than 33⁷⁄₈" (86 cm), the rear leveling legs and spacers can be removed for additional clearance. This will allow the dishwasher to fit into a 33¹⁄₂" (85.1 cm) high cabinet opening, but the dishwasher will be more difficult to move. (Measurements are approximate. Rear and front leveling legs are preset at the factory for 34¹⁄₂" [87.6 cm].) Turn front and rear leveling legs to the same height. Refer to "Dishwasher Height Adjustment Chart." 14