Whirlpool WDT730HAMZ Owners Manual - Page 15
Power cord - connect ground wire
View all Whirlpool WDT730HAMZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
WARNING Electrical Shock Hazard Electrically ground appliance. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 25. Power cord - connect ground wire Wiring configuration Power supply wire: white black ground wire Terminal box wire: white black ground connector 27. Power cord - secure cord in strain relief A A. Ground wire Remove the ground connector screw and place it through the ring terminal of the green ground wire of power cord. Reattach and tighten the ground connector screw. 26. Power cord - connect remaining wires Tighten strain relief screws to secure cord. 28. Power cord - reinstall terminal box cover and wires Select twist-on wire connectors of the proper size provided in this kit (Straight: Whirlpool Part Number 4317824, 90°: Whirlpool Part Number W10278923RP). Connect wires, black to black and white to white, using the twist-on wire connectors. NOTE: Do not pre-twist stranded wire. Twist on wire connector. Gently tug on wires to be sure both are secured. Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside the box and not pinched by the cover. Use a 1/4" hex-head socket, nut driver, or Torx® T20® screwdriver, and the screw removed in step 22 to secure the terminal box cover. If power cord supplied model, remove the first tie strap closest to the plug to maximize the cord length. Do not remove any other tie straps. NOTE: Route power cord out the rear of the dishwasher. Do not plug cord into an outlet until instructed to do so. 15