Whirlpool WDT730PAH Owners Manual - Page 9
Option Selections, Options, Can Be, Selected, What It Does, Added, Time To, Cycle, Water, Gallons,
View all Whirlpool WDT730PAH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPTION SELECTIONS OPTIONS Delay displays how many hours before the cycle will begin. To delay the start: 1. Select a wash cycle and options. 2. Press DELAY. Each time you press Delay, it will display the next available delay time. 3. Press START/RESUME to begin the delay countdown. NOTE: If the door is opened, such as to add a dish, the Start/Resume button must be pressed to resume the delay countdown. Sanitizes dishes and glassware in accordance with NSF International NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Only sanitizing cycles have been designed to meet the requirements of the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. There is no intention, either directly or indirectly, that all cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. The Sani Rinse indicator glows at the end of the cycle if the Sani Rinse option was successfully completed. If the indicator does not activate, it is probably due to the cycle being interrupted. Dries dishes with heat. This option, with the use of rinse aid, will provide better drying results. Plastic items are less likely to deform when loaded in the top rack. Use Heat Dry for optimum drying performance. For air dry, Heat Dry LEDs are off. Raises the main wash temperature to improve cleaning for loads containing tough, baked-on food. CAN BE WHAT IT DOES ADDED SELECTED TIME TO WITH CYCLE Available with Delays start of NA any cycle a cycle up to 24 hours. ADDED WATER GALLONS (LITERS) NA Sensor Heavy Normal Raises the main wash temperate to 135°F (57°C) and the final rinse temperature to (156°F (69°C). 0:05 to 1:06 0 to 3.9 (0 to 14.6) Sensor Heavy Normal 1 Hr Wash Soak & Clean Uses a heating element to speed drying times. Heat Dry option defaults to On when any cycle is selected, except for 1 Hr Wash. Sensor Heavy Normal Soak & Clean Raises the main wash temperate to 135°F (57°C). NA 0:05 to 0:13 NA 0 to 3.9 (0 to 14.6) Use the Control Lock option to avoid unintended use of dishwasher between cycles or cycle and option changes during a cycle. To turn on Control Lock, press and hold CONTROL LOCK for 3 seconds. Control Lock light will stay on for a short time, indicating that it is activated. When the Control Lock indicator is lit, all buttons are disabled. If you press any button while your dishwasher is locked, the light flashes three times. The dishwasher door can still be opened/ closed while the controls are locked. To turn off Control Lock, press and hold CONTROL LOCK for 3 seconds. Control Lock light turns off. 9