Whirlpool WED5800BW Installation Guide - Page 20

10. Remove door strike and door strike label Door strike Door strike label 12. Insert screws in hinge holes on dryer cabinet Remove door strike and door strike label from dryer cabinet. Insert the door strike into hole where door strike label was removed and secure with screw. Cover original door strike hole with door strike label and press firmly into place. 11. Remove and transfer plugs NOTE: 2 people may be needed to reinstall door. Insert screws into the bottom holes on left side of dryer cabinet. Tighten screws halfway. Position door so large end of door hinge slot is over screws. Slide door up so screws are in bottom of slots. Tighten screws. Insert and tighten top screws in hinges. 13. Check door strike alignment Remove the 4 screws that attach 2 plugs on the left side. Transfer plugs to opposite side using the same 4 screws. Close door and check that door strike aligns with door catch. If it is needed, slide door catch left or right within slot to adjust alignment. TROUBLESHOOTING See the Use and Care Guide or visit our website and reference "Frequently Asked Questions" to possibly avoid the cost of a service call. W10562362A W10562363A-SP ®/™ ©2013 Whirlpool. All rights reserved. ®/™ ©2013 Whirlpool. Tous droits réservés. 05/13 Printed in U.S.A. Imprimé au E.E.U.U.