Whirlpool WED5800SW Installation Instructions - Page 2

INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. The parts supplied are in the washer basket. Tools needed for connecting the drain hose and water inlet hoses: s Pliers that open to 1 3.95 cm) s Flashlight (optional) Parts supplied: Alternate Parts Your installation may require additional parts. For ordering information, please refer to the toll-free phone numbers on the front page of the Washer User Instructions. If You Have: You Will Need to Buy: Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) 1" (2.5 cm) diameter standpipe 1¹⁄₄" (3.2 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 280130 A B C A. Drain hose form B. Water inlet hoses (2) C. Flat water inlet hose washers (4) Tools needed for securing the drain hose and leveling the washer: s Adjustable or open end wrench 14 mm) s Level s Wood block s Ruler or measuring tape Parts supplied: Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall drain tub or utility sink, sump pump and connectors (available from local plumbing suppliers) Floor drain Siphon break kit, Part Number 280129; additional drain hose, Part Number 3357090 Water faucets 2 longer water fill hoses: beyond reach of fill 6 ft (1.8 m) Part Number 76314, hoses 10 ft (3.0 m) Part Number 350008 Drain hose too short Kit Part Number 280131 Lint clogged drain Drain protector, Part Number 367031 A B A. Beaded tie strap B. Front leveling feet with nuts (2) 2