Whirlpool WED7300XW Owners Manual - Page 5
Quick Start Guide - specifications
UPC - 883049202747
View all Whirlpool WED7300XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
QUICK START GUIDE NOTE: This Use and Care Guide covers several different models. Your dryer may not have all of the cycles and features described. WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. The following is a guide to using your dryer. Please refer to specific sections of this manual for more detailed information. START 1. Clean the lint screen before each load. 2. Place laundry in dryer and shut door. 3. Press POWER. 4. Select AUTOMATIC or MANUAL cycle. 5. Select OPTIONS and/or CYCLE SIGNAL, if desired. See "Additional Features." 6. Press and Hold START/PAUSE to begin. AUTOMATIC CYCLES Automatic Cycles match the cycle setting to the type of load, and adjust Dryness Level for optimal performance. See "Automatic Preset Cycle Settings Chart." 1. Press POWER. 2. Turn knob to desired Automatic Cycle. 3. Select DRYNESS LEVEL to adjust how dry you want the load. 4. Select OPTIONS. 5. Press and Hold START/PAUSE. To make changes to the Dryness Level: NOTE: Dryness selections can be made only while using Automatic Cycles. 1. Press START/PAUSE once. 2. Select DRYNESS LEVEL. 3. Press and Hold START/PAUSE. STOPPING, PAUSING, OR RESTARTING To stop or pause Open the door or press START/PAUSE once. Press START/PAUSE twice to cancel a cycle. To restart Close the door. Press and Hold START/PAUSE. MANUAL CYCLES Use Manual Cycles to set a drying time and temperature. 1. Press POWER. 2. Turn knob to desired Manual Cycle. 3. Press TIME ADJUST up or down arrow buttons until the desired drying time is displayed. 4. Press TEMP until the desired temperature illuminates. NOTE: During the Manual Cycle, you can change the settings for Time, Temp, the WRINKLE SHIELD™ feature, and Cycle Signal. 5. Press and Hold START/PAUSE. TIMED DRY - Use this cycle if items are still damp after an Auto cycle. QUICK DRY (on some models) - Use this cycle for drying small loads or items requiring a short drying time. TOUCH UP (on some models) - Use this cycle to help smooth out wrinkles from clean, dry clothes. STEAM CYCLES (Steam models only) Steam Cycles use water and heat to reduce wrinkles and odors in dry items. See "Cycles" for more details on each cycle. 1. Press POWER. 2. Select ENHANCED TOUCH UP or QUICK REFRESH 1-4 or 5-8 Garments cycle. 3. Press TIME ADJUST up or down until the desired drying time is displayed (only on Enhanced Touch Up Cycle). 4. Press TEMP until the desired temperature illuminates. 5. Press and Hold START/PAUSE. 5