Whirlpool WED8200YW Installation Guide - Page 8

If your outlet looks like this: Power supply cord 4-wire receptacle (NEMA Type 14-30R): Go to "4-Wire Power Supply Cord Connection" on this page. Power supply cord 3-wire receptacle (NEMA Type 10-30R): Go to "3-Wire Power Supply Cord Connection" on page 9. 4-wire Power Supply Cord Connection IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3-wire connections. 2. Connect neutral ground wire and neutral wire E B C Connect neutral ground wire (E) and neutral wire (white) (C) of power supply cord under center terminal block screw (B). Tighten screw. 3. Connect ground wire 4-wire receptacle (NEMA 4-prong plug type 14-30R) A F Spade terminals with upturned ends Ring terminals 1. Prepare to connect neutral ground wire and neutral wire E A B Connect ground wire (F) (green or bare) of power supply cord to external ground conductor screw (A). Tighten screw. 4. Connect remaining wires Remove center terminal block screw (B). Remove neutral ground wire (E) from external ground conductor screw (A). Connect remaining wires to outer terminal block screws. Tighten screws. Finally, reinsert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. Now, go to "Venting Requirements". 8