Whirlpool WED9290FW Dimension Guide - Page 1

Front view: 27" (686 mm) 383/4" Min. (984 mm) 39" Max. (990 mm) Electric Heat Pump Dryer PRODUCT MODEL NUMBERS WED7990F, WED9290F 513/4" min. (1314 mm) 313/4" min. (806 mm) Side view: Recommended installation clearances (dryer only): 18" min. (457 mm) 3" (76 mm) 48 in.2 min. (310 cm2) 5" (127 mm) 24 in.2 min. (155 cm2) 3" (76 mm) 1" (25 mm) 1" (25 mm) Installation spacing for recessed area or closet installation All dimensions show recommended and minimum spacing allowed. Additional spacing should be considered for ease of installation and servicing. Additional clearances might be required for wall, door, floor, moldings, and drain system. Additional spacing should be considered on all sides of the dryer to reduce noise transfer. For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable. Companion appliance spacing should also be considered. NOTE: 0" (0 mm) spacing is allowed behind dryer, providing drain hose is not kinked or pinched. Back view: 61/2" (165 mm) Power cord/ cable Water Cooling drain fan 297/8"* (759 mm) * Approx. measurement. 131/2" 61/2" (343 mm) (165 mm) NOTE: Allow clearance behind dryer for proper drain hose routing and cooling fan ventilation. Push dryer back as far as possible and make sure drain hose is not crushed or kinked. W10777574A 12/2015