Whirlpool WED99HEDW Installation Guide - Page 15
Complete Installation Checklist
View all Whirlpool WED99HEDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, re, or electrical shock. 3. Plug into a grounded 3 prong outlet Complete Installation Checklist q Check that all parts are now installed. If there is an extra part, go back through steps to see what was skipped. q Check that dryer is level. See "Level Dryer." q Check that you have all of your tools. q Dispose of/recycle all packaging materials. q Check dryer's final location. q Remove film on console and any tape remaining on dryer. q Wipe dryer drum interior thoroughly with a damp cloth to remove any dust. q Read "Dryer Use" in your Use and Care Guide. q For power supply cord installation, plug into a grounded outlet. For direct wire installation, turn on Power. q Select a Timed Dry heated cycle, and start dryer. If dryer will not start, check the following: • Controls are set in a running or "On" position. • Start button has been pushed firmly. • Dryer is plugged into an outlet and/or electrical supply. • Household fuse is intact and tight, or circuit breaker has not tripped. • Dryer door is closed. This dryer automatically runs an installation diagnostic routine at the start of its first cycle. NOTE: You may notice an odor when dryer is first heated. This odor is common when heating element is first used. The odor will go away. 4. Check for leaks While running the first cycle, check that there are no leaks from the drain hose. 15