Whirlpool WED99HEDW Use & Care Guide - Page 5
Control Panel and Features - manual
View all Whirlpool WED99HEDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Control Panel and Features NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name. 1 2 3 4 5 A B C D E F 6 7 1 POWER Touch to turn the dryer on and off. Touch to stop/cancel a cycle at any time. 2 CYCLE CONTROL KNOB Turn the knob to select a cycle for your laundry load. Automatic Cycles are Heavy Duty, Normal, Bulky, Casual, Delicates, and Towels. Manual Cycles are Quick Dry and Timed Dry. See "Cycle Guide" for detailed descriptions of cycles. 3 START/PAUSE Touch and hold until the LED comes on to start a cycle, or touch once while a cycle is in process to pause it. 4 LED DISPLAY AND SETTINGS When you select a cycle, its settings will light up and the Estimated Time Remaining (for Automatic Cycles) or actual time remaining (for Manual Cycles) will be displayed. On 2-digit displays, for times longer than 99 minutes, hours will be displayed followed by minutes. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles. Cycle Status Lights The indicators at the top of the display will let you know what stage of the drying cycle is in process. For more information on each stage, see "Cycle Status Indicators." -/+ (Adjust Drying Time) Touch "+" or "-" with Manual Cycles to increase or decrease the length of a Timed Dry or Quick Dry cycle. Temp When using Manual Cycles, you may select a dry temperature based on the type of load you are drying. Use the warmest setting safe for the items in the load. Follow garment label instructions. NOTE: Automatic Cycles use a preset temperature that is not adjustable. Dryness Level When using Automatic Cycles, you may select a Dryness Level based on the type of load you are drying. NOTE: Dryness Level is for use with Automatic Cycles only. Damp Dry Signal Touch to select the Damp Dry Signal. When selected, a series of beeps will sound when the load is damp, but not completely dry. This will allow you to take clothes out of the load that do not need to dry completely. This option is available on Heavy Duty, Normal, Bulky, Casual, Delicates, and Towels cycles. The Damp Dry Signal is selected as a default for the Bulky cycle, as a reminder to manually reposition bulky loads midway through the cycle. Wrinkle Shield™ Option If you will be unable to remove a load immediately, touch Wrinkle Shield to add up to 150 minutes of periodic tumbling to help reduce wrinkling. 5 Clean HybridCare™ Filter light Reminds you to clean the HybridCare™ filter after every 5th cycle. Light will reset after filter is cleaned and filter is put back in cabinet. 6 HybridCare™ Energy OPTIONS Use to select an available mode for your dryer. Your HybridCare™ dryer is more efficient in all modes than your typical dryer. A Speed Select this option to save time, but uses more energy. B Balanced Use this option to blend between cycle time and energy savings. C Eco Eco is the default option for all cycles, which allows you to increase your energy savings by using a lower heat level. This will increase dry times. NOTE: Energy savings may vary across loads and cycles. 5