Whirlpool WFC130M0AB Use & Care Guide - Page 13
Troubleshooting
View all Whirlpool WFC130M0AB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
STORAGE DRAWER OR WARMING DRAWER (on some models) Check that storage drawer or warming drawer is cool and empty before cleaning. Cleaning Method: ■ Mild detergent OVEN CAVITY Do not use oven cleaners on models with self-clean. Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain and staining, etching, pitting or faint white spots can result. Cleaning Method: ■ See the "Self-Cleaning Cycle" section, if available on your model. Oven Light The oven light is a standard 40-watt appliance bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the off position. 2. Turn the glass bulb cover in the back of the oven counterclockwise to remove. 3. Turn bulb counterclockwise to remove from socket. To Replace: 1. Unplug range or disconnect power. 4. Replace bulb, then bulb cover by turning clockwise. 5. Plug in range or reconnect power. TROUBLESHOOTING First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call. www.whirlpool.com Operation PROBLEM Nothing will operate Cooktop will not operate Excessive heat around cookware on cooktop Cooktop cooking results not what expected Cooktop element cycles on and off on High setting. Oven will not operate Oven temperature too high or too low Oven indicator lights flash POSSIBLE CAUSES Power supply cord is unplugged. Household fuse is blown, or a circuit breaker is tripped. The control displays an F9 or F9 E0 error code. The control knob is not set correctly. On ceramic glass models, the oven control lockout is set. Cookware is not the proper size. Control knob set to incorrect heat level Range is not level. Element cycling due to a temperature limiter Delay start is set. Control lock is on. Control is in Demo Mode. Electronic oven control set incorrectly Oven temperature needs adjustment. Power to range is turned on or restored. SOLUTIONS Plug into a grounded outlet. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. The electrical outlet in the home may be miswired. Contact a qualified electrician to verify the electrical supply. Push in knob before turning to a setting. See the control lock keypad feature in the "Feature Guide." Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ¹⁄₂" (1.3 cm) outside the cooking area. See "Cooktop Use" section. Level the range. See the Installation Instructions. This is normal operation. The element may cycle on and off to keep the cooktop from overheating. See "Cook Time" section. Press and hold START for 3 seconds to unlock. Press and hold START TIME for 10 seconds to exit Demo Mode. Demo Mode is used for display models in a showroom. See "Electronic Oven Controls" section. See "Oven Temperature Control" in the "Electronic Oven Controls" section. See "Control Display" in the "Electronic Oven Controls" section. If the indicator lights keep flashing, call for service. See cover for contact information. 13