Whirlpool WFE505W0H Owners Manual - Page 16
Possible Causes
View all Whirlpool WFE505W0H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PROBLEM Display shows messages Self-Cleaning Cycle will not operate Mineral deposits are left on the oven bottom after the Steam Clean cycle Oven cooking results not what expected POSSIBLE CAUSES Power failure (display shows flashing time) Error code (display shows letter followed by number) Start needs to be pressed so a cycle can begin (display shows "PUSH" or "PSH"). The oven door is not closed. The Self-Cleaning function has not been entered correctly. A Timed Cooking function has been entered. The range is in Sabbath Mode. Tap water was used in the Steam Clean cycle. Range is not level. Range is not level. The temperature set was incorrect. Oven temperature needs adjustment. Oven was not preheated. Racks were positioned improperly. Not enough air circulation around bakeware. Batter distributed unevenly in pan Darker browning of food caused by dull or dark bakeware Lighter browning of food caused by shiny or light colored bakeware Incorrect length of cooking time was used. Oven door was not closed. Oven door was opened during cooking. Rack is too close to bake burner, making baked items too brown on bottom. Pie crusts browning too quickly. SOLUTIONS Clear the display. On some models, reset the clock, if needed. See "Clock" keypad feature in the "Feature Guide" section. Depending on your model, press CANCEL to clear the display. See "Control Display" in the "Electronic Oven Controls" section. If it reappears, call for service. See cover for contact information. See the "Start" keypad feature in the "Feature Guide" section. Make sure the oven door is fully closed. See the "Self-Cleaning Cycle" section. See the "Cook Time" section. See the "Sabbath Mode" section. Use distilled or filtered water in the Steam Clean cycle. To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to thoroughly remove any vinegar residue. Mineral deposits will collect on dry areas of the oven bottom during the Steam Clean cycle. Level the range. See the Installation Instructions. To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to thoroughly remove any vinegar residue. Level the range. See the Installation Instructions. Double-check the recipe in a reliable cookbook. See "Oven Temperature Control" in the "Electronic Oven Controls" section. See "Baking and Roasting" section. See "Positioning Racks and Bakeware" section. See "Positioning Racks and Bakeware" section. Check that batter is level in the pan. Lower oven temperature 25°F (15°C) or move rack to a higher position in the oven. Move rack to a lower position in the oven. Adjust cooking time. Be sure that the bakeware does not keep the door from closing. Oven peeking releases oven heat and can result in longer cooking times. Move rack to higher position in the oven. Use aluminum foil to cover the edge of the crust and/or reduce baking temperature. 16