Whirlpool WFG110AVQ Owners Manual - Page 11

Oven Light, Oven Door - model

Get Whirlpool WFG110AVQ - 30inch Standard Clean Gas Range PDF manuals and user guides
UPC - 883049146980
View all Whirlpool WFG110AVQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

OVEN CAVITY Do not use oven cleaners. Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain and staining, etching, pitting or faint white spots can result. Cleaning Method: s Mild cleaner and noncorrosive scrubbing pad. OVEN RACKS AND ROASTING RACKS Cleaning Method: s Steel-wool pad BROILER PAN AND GRID Cleaning Method: s Mildly abrasive cleanser: Scrub with wet scouring pad. s Solution of ¹ ₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water: Soak for 20 minutes, then scrub with scouring or steel-wool pad. s Oven cleaner: Follow product label instructions. Porcelain enamel only, not chrome s Dishwasher Oven Light The oven light is a standard 40-watt appliance bulb. Press the manual oven light switch (on some models) on the backguard to turn on and off. This oven does not have an automatic light switch. Before replacing, make sure the oven and cooktop are cool and the control knobs are off. To Replace: 1. Unplug range or disconnect power. 2. Turn bulb counterclockwise to remove from socket. 3. Replace bulb. 4. Plug in range or reconnect power. Oven Door For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy. To Remove: 1. Open the oven door. Insert hinge pins, included with your range, into both hinge hangers. Do not remove the pins while the door is removed from the range. 2. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface. 3. Pull door straight up, then toward you. Do not remove hinge pins until the door is replaced on the range. To Replace: 1. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface. 2. Hold oven door so that the top edge of each door slot is horizontal. Insert door hinge into the hinge slots. 3. Tilt top of door toward range. Insert bottom door hinge notch down onto front frame edge. 4. Open the door completely and remove the hinge pins. Save hinge pins for future use. 5. Close the door slowly to assure door side panel clearance and proper hinge engagement. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
11
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
■
Mild cleaner and noncorrosive scrubbing pad.
OVEN RACKS AND ROASTING RACKS
Cleaning Method:
■
Steel-wool pad
BROILER PAN AND GRID
Cleaning Method:
■
Mildly abrasive cleanser:
Scrub with wet scouring pad.
■
Solution of
¹±₂
cup (125 mL) ammonia to 1 gal. (3.75 L) water:
Soak for 20 minutes, then scrub with scouring or steel-wool
pad.
■
Oven cleaner:
Follow product label instructions.
Porcelain enamel only, not chrome
■
Dishwasher
Oven Light
The oven light is a standard 40-watt appliance bulb. Press the
manual oven light switch (on some models) on the backguard to
turn on and off. This oven does not have an automatic light
switch.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.
To Replace:
1.
Unplug range or disconnect power.
2.
Turn bulb counterclockwise to remove from socket.
3.
Replace bulb.
4.
Plug in range or reconnect power.
Oven Door
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1.
Open the oven door. Insert hinge pins, included with your
range, into both hinge hangers. Do not remove the pins while
the door is removed from the range.
2.
Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
3.
Pull door straight up, then toward you. Do not remove hinge
pins until the door is replaced on the range.
To Replace:
1.
Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
2.
Hold oven door so that the top edge of each door slot is
horizontal. Insert door hinge into the hinge slots.
3.
Tilt top of door toward range. Insert bottom door hinge notch
down onto front frame edge.
4.
Open the door completely and remove the hinge pins. Save
hinge pins for future use.
5.
Close the door slowly to assure door side panel clearance
and proper hinge engagement.