Whirlpool WFG114SWQ Dimension Guide - Page 1
Whirlpool WFG114SWQ Manual
UPC - 883049221847
View all Whirlpool WFG114SWQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
® 30" Freestanding Gas Range PRODUCT MODEL NUMBERS SF114PXS WFG114SV WFG114SW Gas supply: Use ³⁄₄" rigid pipe gas supply line to the range location. A smaller size pipe on long runs may result in insufficient gas supply. With L.P. gas, piping or tubing size can be ¹⁄₂" minimum. If local codes permit, it is recommended that new flexible metal tubing, design-certified by CSA, ¹⁄₂" or ³⁄₄" I.D., be used for connecting the range to the rigid gas supply line. A ¹⁄₂" male pipe thread is needed for connection to pressure regulator female pipe threads. An individual manual shutoff valve must be located in the same room, but external to the range. Electrical: A 120-volt, 60 Hz, AC-only, 15 amp, electrical supply fused on both sides of the line. A separate circuit is recommended. A time-delay fuse or circuit breaker is recommended. OVERALL DIMENSIONS 26³⁄₄" (67.9 cm) depth with handle 36" (91.4 cm) cooktop height 46¹⁄₄" (117.5 cm) overall height for tall backguard models CABINET OPENING DIMENSIONS 24¹⁄₄" (61.6 cm) 29⁷⁄₈" (75.9 cm) width 18" (45.7 cm) min. clearance upper side cabinet to countertop This shaded area recommended for electrical outlet. 13" (33.0 cm) max. upper cabinet depth 30" (76.2 cm) min. cabinet opening width 30¹⁄₈" (76.5 cm) opening width For minimum clearance to top of cooktop, see NOTE.*** 2" (5.1 cm) min. countertop space to side wall or other combustible material This shaded area recommended for installation of gas pipe. 24" (61 cm) 10" (25.4 cm) Do Not seal the range to the side cabinets. If cabinet depth is greater than 24" (61.0 cm), oven frame must extend beyond cabinet fronts by ¹⁄₂" (1. 3 cm) min. Contact a qualified floor covering installer to check that the floor covering can withstand at least 200°F. Use an insulated pad or ¹⁄₄" (6.4 mm) plywood under range if installing range over carpeting. 8" 5" (20.3 cm) 2" (12.7 cm) (5.1 cm) 5" 3" (7.6 cm)(12.7 cm) *** NOTE: 24" (61.0 cm) min. when bottom of wood or metal cabinet is protected by not less than ¹⁄₄" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. 30" (76.2 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet. Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation our products, we reserve the right to change materials and specifications without notice. Instructions packed with product. Specifications subject to change without notice. Ref. W10032050B 9/22/10