Whirlpool WFG535S0J Installation Instructions - Page 21
To Convert Oven Broil Burner Propane Gas to, Natural Gas, Complete Installation Propane Gas
View all Whirlpool WFG535S0J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
To Convert Oven Broil Burner (Propane Gas to Natural Gas) 1. Remove the screw from the broil burner. 2. Remove the broil burner from the broil burner orifice hood. NOTE: The broil burner will hang in the back of the oven while changing the orifice hood. B A Complete Installation (Propane Gas to Natural Gas) 1. Refer to the "Make Gas Connection" section for properly connecting the range to the gas supply. 2. Refer to the "Electronic Ignition System" section for proper burner ignition, operation, and burner flame adjustments. IMPORTANT: You may have to adjust the "LO" setting for each cooktop burner. Checking for proper cooktop, bake and broil burner flame is very important. Natural gas flames do not have yellow tips. 3. Refer to "Complete Installation" in the "Installation Instructions" section of this manual to complete this procedure. NOTE: Be sure to save the orifices that have just been replaced in the conversion. C A. Broil burner B. Screws C. Orifice hood 3. Use a 3/8" (1 cm) combination wrench and turn the Propane gas broil burner orifice hood counterclockwise to remove. The hood will be stamped with a "090." 4. Replace the "090" hood with a "54" hood. Install the Natural gas broiler burner orifice hood, turning it clockwise until snug. IMPORTANT: Do not overtighten. A x.xx A. Orifice hood 5. Place the broil burner on the broil burner orifice hood and insert the broil burner ceramic igniter in the hole in the rear of the oven. 6. Position the broil burner against the top of the oven and attach it with 2 screws. 7. Replace storage drawer, warming drawer or premium storage drawer. See the "Storage Drawer" or "Warming Drawer or Premium Storage Drawer" section. 8. Replace the oven door. See the "Oven Door" section. 9. Replace the oven racks. 21