Whirlpool WFW3090J Owners Manual - Page 21
Route Drain Hose
View all Whirlpool WFW3090J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. Remove power cord from clips Route Drain Hose Proper routing of the drain hose protects your floor from damage due to water leakage. Read and follow these instructions. 5. Remove drain hose from washer Remove power cord from clips and place over top of washer to allow free access to back of washer. NOTE: If washer is transported at later date, call your local service center. To avoid suspension and structural damage, a certified technician must properly set up washer for relocation. IMPORTANT: Do not plug washer in until installation has been completed. 4. Cover bolt holes with transport bolt hole plugs Gently pull the corrugated drain hose from the shipping clips. 6. Connect laundry tub drain or standpipe drain hose form (floor drain installations only) Close bolt holes on cabinet back with four transport bolt hole plugs included with washer parts. For floor drain installations, you will need to connect the drain hose form to the end of the drain hose. You may need additional parts with separate directions. See "Alternate Parts." 21