Whirlpool WFW3090JW Owners Manual - Page 24
Complete Installation Checklist
View all Whirlpool WFW3090JW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
16. Tighten leveling feet Jam nut When washer is level and all four feet are firmly in contact with the floor, use a 1/2" (13 mm) open-end or adjustable wrench to turn jam nuts counterclockwise on leveling feet tightly against washer cabinet. HELPFUL TIP: You may want to prop washer with wooden block. Complete Installation Checklist q Check electrical requirements. Be sure you have correct electrical supply and recommended grounding method. q Check that all parts are now installed. If there is an extra part, go back through steps to see what was skipped. q Check that you have all of your tools. q Check that transport bolts were completely removed from back of washer. q Check that hose is attached and water faucet is on. q Check for leaks around faucet, valve, and inlet hose. q Remove any tape remaining on washer. q Check that washer is plugged into a grounded 3 prong outlet. q Dispose of/recycle all packaging materials. q Read "Using Your Washer." q To test and clean your washer, turn on the washer and choose the Normal cycle and run it without clothes. Use only HE detergent. Use 1/2 the manufacturer's recommended amount for a medium-size load. 17. Plug into a grounded 3 prong outlet 24