Whirlpool WFW5090GW Installation Guide - Page 11

8. Select options, if desired† 9. Setting a delayed wash, if desired† Delay Wash Dosing Aid (Detergent Button): The Detergent button calculates a recommended amount of detergent in milliliters. This will be displayed after touching the Start/Pause button and the load is detected. The Detergent button also lets you adapt your washer to the dosing amounts of your detergent and the hardness of your local water. To set the washer for the detergent dosing amount: 1. Check your detergent dosing amount for medium soil level and medium water hardness. NOTE: Do not add more than the dose recommended by the detergent manufacturer. 2. Touch and hold the Detergent button until the bottle symbol on the display lights up. Detergent 3 Sec 3. Turn the knob to adjust the dosing value to the one shown on the detergent bottle. Press the knob to confirm your selection. See the chart in "About Detergent Concentration." Wool Quick Wash Handwash Rinse & Spin Spin X-hot Hot Warm Cool Cold Colors ml Max High Med Low O Rinse Hold X-hot Hot Warm Cool Cold Colors ml Max High Med Low O Rinse Hold If you do not want to begin a cycle immediately, you may choose the Delay Wash option. This will delay the start of the wash cycle by up to 24 hours. To set a Delayed Wash: 1. Touch the Delay Wash button to set the desired delay time. 2. Turn the knob to the number of hours you want to delay the start of the wash cycle. The delay time will appear on the display. Press the knob to confirm your selection. After touching the Start/Pause button, the door will lock and the time will count down until the delay time has been reached. The washer will start and the display will show the remaining time in the cycle. 10. Change temperature or spin speed, if desired† Temp Spin Speed To set the washer for local water hardness (washer is preset for soft water): 1. Check your regional water hardness level by consulting your local authorities or the Internet. 2. If your water is not soft, touch and hold the Program and Detergent buttons at the same time. "1" (for soft water) appears on the display. P Program Detergent 3 Sec 3. Turn the knob to adjust the water level to either "2" (Medium) or "3" (Hard). Press the knob to confirm your selection. X-hot Hot Warm Cool Cold Colors ml Max High Med Low O Rinse Hold Touch the Temp or Spin Speed button; then turn the knob to select the desired temperature or spin speed. As you turn the knob, an indicator light will light up next to the temperatures or spin speeds to the right of the knob. Stop turning when the indicator next to the desired selection lights up. Press the knob to confirm your selection. Wool Quick Wash Handwash Rinse & Spin Spin ml X-hot Hot Warm Cool Cold Colors Max High Med Low O Rinse Hold †Not all options and settings are available with all program/cycles. See "Program/Cycle Guide" for available options and settings. 11