Whirlpool WFW87HEDW Use & Care Guide - Page 12
ouch and hold START to begin, wash cycle, Remove garments promptly, after cycle is finished, Select
View all Whirlpool WFW87HEDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Using Your Washer 10. Select any additional options* 13. Remove garments promptly after cycle is finished Appearance may vary. To add an option to the cycle, touch its name - Steam Clean, EcoBoost™ option, FanFresh®/TumbleFresh™, Extra Rinse, Cycle Signal, or Control Lock. To remove an option from the selected cycle, touch the option again. 11. Setting a delayed wash If you do not want to begin a cycle immediately, you may choose the DELAY WASH option. This will delay the start of the wash cycle by up to 12 hours. To set a delayed wash: 1. Touch DELAY WASH + and - buttons to set the desired delay time. 2. Touch and hold START to set the delay. The delay countdown has started when the START light stops blinking. 12. Touch and hold START to begin wash cycle Promptly remove garments after cycle has completed to avoid odor and rusting of metal objects on garments. When unloading garments, pull back the door seal and check for small items between the tub and the washer drum. If you will be unable to remove the load promptly, use the FanFresh® or TumbleFresh™ option (depending on model). If selected, the FanFresh® option will activate the fan and OR tumble the load periodically for up to 12 hours. The TumbleFresh™ option will tumble the load periodically for up to 6 hours. To turn off the FanFresh® or TumbleFresh™ option, touch POWER. To set the washer so that the FanFresh®/ TumbleFresh™ option does not come on for future cycles, touch FanFresh or TumbleFresh. NOTE: n The door will remain locked while the FanFresh®/ TumbleFresh™ option is active. To cancel the option and unlock the door, touch POWER. n A small amount of water may remain in the dispensers after the wash cycle is complete. This is normal. n This washer has a tight seal to avoid water leaks. To avoid odors, leave the door open to allow the washer to dry between uses. Touch and hold START to start the wash cycle. To pause a cycle in progress, touch START once, then touch and hold again to continue the cycle. To cancel a cycle, touch POWER. Once you touch and hold START, you will hear the door lock, unlock, and lock again. The washer door will remain locked during the wash cycle. Unlocking the door to add garments: If you need to open the door to add 1 or 2 missed garments, you may do so while the "Add Garment" light is lit. Touch START once; the door will unlock once the washer movement has stopped. This may take several minutes. Then close door and touch and hold START again to restart the cycle. 12 *Not all options and settings are available with all cycles. See "Cycle Guide" for available options and settings.