Whirlpool WFW94HEXR Use & Care Guide - Page 22
washed in this cycle, wash time will be increased.
View all Whirlpool WFW94HEXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Washer not performing as expected (cont.) Solution Incorrect dispenser operation Clogged dispensers or laundry products dispensing too soon. Liquid chlorine bleach not used in bleach compartment. Oxi Dispense option (on some models) not selected. Water in dispenser after cycle has finished. Do not overfill dispenser. Overfilling causes immediate dispensing. Load dispensers before starting a cycle. Homes with low water pressure may result in residual powder in the dispenser. To avoid, select a warmer wash temperature if possible, depending on your load. Use only liquid chlorine bleach in the bleach compartment. You may use powdered or liquid laundry boosters in the Oxi compartment (on some models). Always select the Oxi Dispense option for proper flushing of Oxi products from dispenser. Leftover powder may be wiped out by hand, if needed. Otherwise, select Oxi Dispense option with the next cycle to rinse out dispenser. It is normal for small amounts of water to remain in dispenser at the end of the cycle. Cycle time changes or Normal washer operation. cycle time too long Excessive suds in washer. The cycle times vary automatically based on your water pressure, water temperature, detergent, and clothes load. The options you select will also affect the cycle times. When excessive suds are detected, a special suds routine automatically starts to remove extra suds and ensure proper rinsing of your garments. This routine will add time to the original cycle. Load may be out of balance. Not using correct cycle for load type. When load unbalance occurs, an washing process will start to redistribute the load. This extends the cycle time. Avoid washing single items. Balance a single item such as a rug or jeans jacket with a few extra items. Spin time is added if an unbalanced load is detected. The washer will attempt to redistribute the load with additional tumbling. The Quick Wash cycle is designed for smaller load sizes (3-4 items) of lightly soiled garments. If larger loads are washed in this cycle, wash time will be increased. When using the Quick Wash or Delicate cycles, you should wash small loads. This ensures a gentle wash for your garments without increasing cycle times. 22