Whirlpool WGD4750XQ Installation Instructions - Page 15

29" Wide Model Large Side-Swing Door 1. Place towel on dryer 4. Remove and transfer hinge hole plugs Place towel on top of dryer to avoid damaging the surface. 2. Remove bottom screws Use a small, flat-blade screwdriver to gently remove 4 hinge hole plugs on left side of dryer cabinet. Insert plugs into hinge holes on opposite side of dryer cabinet. 5. Insert screws in hinge holes on dryer cabinet Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer cabinet side of hinges. 3. Lift door off top screws NOTE: Two people maybe needed to reinstall door. Insert screws into bottom holes on left side of dryer cabinet. Tighten screws halfway. Position door so large end of door hinge slot is over screws. Slide door up so screws are in bottom of slots. Tighten screws. Insert and tighten top screws in hinges. 6. Check door strike alignment Lift door until top screws in cabinet are in large part of hinge slot. Pull door forward off screws. Set door on top of dryer. Remove top screws from dryer cabinet. Close door and check that door strike aligns with door catch. If needed, slide door catch left or right within slot to adjust alignment. 15