Whirlpool WGD5000DW Use & Care Guide - Page 8
Press PUSH to START to, begin cycle, Set cycle settings and options, Select the desired cycle,
View all Whirlpool WGD5000DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Select the desired cycle 5. Select Cycle Signal (if desired) Select the desired cycle for your load. See the Cycle Guide for more information about each cycle. ACCUDRY™/AUTOMATIC DRY Cycles You can select a different dryness level, depending on your load, by turning the knob to dryness level. Selecting More or Very Dry, ENERGY PREFERRED, or Less Dry automatically adjusts the dryness level at which the dryer will shut off. Once a dry level is set, it cannot be changed without stopping the cycle. ACCUDRY™/AUTOMATIC DRY cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. NOTE: More or Very Dry removes more load moisture. ENERGY PREFERRED is used for a starting point for ACCUDRY™ cycles. Choose ENERGY PREFERRED for optimal energy savings. Less Dry removes less moisture and used for loads you may want to put on a hanger to complete drying. 4. Set cycle settings and options Turn the CYCLE SIGNAL knob to select the desired setting (On or Off). The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. NOTE: When the Wrinkle Shield™ setting is selected and the Cycle Signal is on, the tone will sound every 5 minutes until the clothes are removed, or the Wrinkle Shield™ setting ends. 6. Press PUSH to START to begin cycle Push and hold the PUSH to START knob to begin the cycle. Promptly remove garments after cycle has completed to reduce wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling when you are unable to remove a load from the dryer as soon as it stops. Select cycle settings and options by turning the knob to the desired position. NOTE: Not all options and settings are available with all cycles. Temperature Turn the TEMPERATURE knob to change the drying temperature setting. See "Setting the Drying Temperature". Wrinkle Shield™ feature (on some models) n Get 90 minutes of heat-free, periodic tumbling at the end of a cycle. Turn the WRINKLE SHIELD™ knob to select on or off at any time before the cycle has ended. n On some models with a WRINKLE SHIELD™ cycle will automatically get 40 minutes of heat-free, periodic tumbling at the end of a cycle. 8