Whirlpool WGD5500XW Installation Instructions - Page 18
Remove door strike plug, Check door strike alignment, Place towel on dryer, Lift door off top screws
UPC - 883049200125
View all Whirlpool WGD5500XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
12. Remove door strike plug 2. Remove bottom screws Remove door strike plug. Insert the door strike removed in Step 9 into hole and secure with screw. Insert door strike plug into original door strike hole and secure with screw. 13. Check door strike alignment Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer cabinet side of hinges. 3. Lift door off top screws Close door and check that door strike aligns with door catch. If it is needed, slide door catch left or right within slot to adjust alignment. 27" Wide Model Side-Swing Door 1. Place towel on dryer Lift door until top screws in dryer cabinet are in large part of hinge slot. Pull door forward off screws. Set door (handle side up) on top of dryer. Remove top screws from dryer cabinet. 4. Remove screws from hinges Place towel on top of dryer to avoid damaging the surface. Remove screws attaching hinges to door. 18