Whirlpool WGD7500GW W11040073A Whirlpool Agora Dryer - Page 5
Control Panel and Features - manual
View all Whirlpool WGD7500GW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Control Panel and Features 2 1 3 7 6 4 5 4 NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name. 1 POWER Touch to turn the dryer on and off. Touch to stop/cancel a cycle at any time. 2 WHAT TO DRY/HOW TO DRY First select a cycle from the "What to Dry" (automatic cycles) and then select the "How to Dry" to get the best combination cycle available for the type of items you are going to dry. See the "Cycle Guide" chart for cycle details. 3 START/PAUSE Touch and hold until the LED comes on to start a cycle, or touch once while a cycle is in process to pause it. 4 MODIFIERS Use to select available modifiers for your dryer. Temperature When using a Timed Dry cycle, you may select a dry temperature based on the type of load you are drying, except for the Sanitize cycle. Use the warmest setting safe for the garments in the load. Follow garment label instructions. NOTE: automatic cycles will give you up to three temperatures to adjust and it varies, depending on the "What to Dry" or "How to Dry" selections that have been made. Dryness You may adjust the Dryness on automatic cycles (except for the Sanitize cycle), if desired. NOTE: Dryness is for use with automatic cycles only. +\- Timed Dry Adjust Touch "+" or "-" with a Timed Dry cycle to increase or decrease the length of the cycle. 5 SANITIZE This is a long cycle with high heat, that has been proven to reduce household bacteria. This cycle is not recommended for all fabrics. Use for loads of heavyweight fabrics. 6 LED DISPLAY When you select a cycle, its default settings will light up and the estimated time remaining (for automatic cycles) will vary depending on "What to Dry" and "How to Dry" selections or actual time remaining for Timed Dry cycles (for manual cycles) will be displayed. 7 OPTIONS Use to select available options for your dryer. Drum Light Select Drum Light to turn on the light inside the dryer drum. When touched during a cycle, or when the dryer is not running, the Drum Light turns on and will remain on until Drum Light is touched again, the door is opened and closed, a cycle is started, or the door is left open for 5 minutes. Touch Drum Light at any time to turn the drum light on or off. Wrinkle Shield™ If you will be unable to remove a load immediately, touch Wrinkle Shield™ to add up to 150 minutes of periodic tumbling to help reduce wrinkling. Signal Use this to turn the signal indicating the end of a drying cycle to low, high, or off. The volume you select here will also be applied to the Damp Dry Signal. NOTE: You may also turn off the tones that sound when a feature, setting, or option is touched. Touch and hold Signal for about 3 seconds to turn sounds to low, high, or off. Damp Dry Signal Touch to select the Damp Dry Signal. The volume will be the same sound level as the "Signal" option indicates. When selected, a series of beeps will sound when the load is damp, but not completely dry. This will allow you to take clothes out of the load that do not need to dry completely. This option is available on some cycles. The Damp Dry Signal is selected as a default for the Bedding/Bulky cycle, as a reminder to manually reposition bulky loads midway through the cycle. 5